Zircon: features of the use of "Zircon" in the country and in indoor floriculture

Plants need additional feeding, but the introduced substances are not always quickly absorbed. The intake of a portion of minerals often causes stressful situations in crops. Fertilizer Zircon regulates development processes and helps the plant to cope with stress. The drug modulates the protective properties of plants and at the same time enhances the effect of biological or chemical fertilizers.

Comment! Fertilizer Zircon will help the flowers in the bouquet to keep freshness and fragrance for a long time. Add half the ampoule per liter of water.

What is the use of the drug Zircon

The drug Zircon has a wide spectrum of action, which provides a number of beneficial properties:

its action, which occurs at the cellular level, maintains a healthy balance in tissues, promotes growth and development and increases plant stress resistance and resistance to diseases such as fusarium, bacteriosis, gray and root rot, powdery mildew, late blight, scab, moniliosis and peronoscrosis;
prevents the penetration of heavy metals, radionuclides and pesticides;
contributes to the normalization of metabolic processes in plant organisms;
is an economical top dressing, because its effectiveness is significantly increased when using a lower concentration in solution.

What it is?

Zircon Is environmentally friendly and harmless immunostimulant, which is designed to activate the growth of indoor and garden plants.

It is used to strengthen the root system, accelerate the flowering process and form large and juicy fruits.

The biological product has a positive impact:

affects the immune properties of the plant, increasing resistance to diseases;
promotes faster adaptation when transplanting into open or closed ground;
reduces stress caused by moving a pot to another location;
normalizes metabolic processes;
increases seed germination;
prolongs the duration of flowering of ornamental plants;
improves the quality of soils containing heavy metals;
protects against the harmful effects of UV rays;
increases the plant's resistance to drought, frost or insufficient sun exposure.

The drug is not a fertilizer and belongs to dietary supplements. Once in the plant, it acts at the cellular level and activates its internal reserves. Used in combination with organic and mineral fertilizers.

The drug can be added to the water in a vase with a bouquet of flowers. A wilted bouquet is reanimated in a few hours and will restore wilted flowers.

Composition and advantage

The basis for the development of Zircon is represented by components of plant origin, these are hydroxycinnamic acids. They have an antioxidant effect and serve as an excellent antioxidant against free radicals.

Note: For several centuries, the hydroxycinnamic acids that form the basis of Zircon have been very successfully used in medicine, and now they have been adapted for plants too.

Zircon used as a fertilizer is made on the basis of Echinacea purpurea, which releases the acids used: coffee, chicory, chlorogenic. It contains esters obtained by dissolving hydroxycinnamic acids in alcohol.

Zircon is used as a fertilizer.

Zircon is produced in the form of plastic ampoules with a lid, the volume of which is 1 ml. You can also find it on sale in bottles or plastic cans with a capacity of 1 to 20 liters.

Compared to other drugs widely used in floriculture and plant growing, Zircon has a number of significant advantages:

significantly improving product quality;
fruit ripening processes proceed faster on average by 7-14 days;
allows you to increase productivity by almost 50% or more;
well stimulates the growth and formation of the root system, as well as the setting of new fruits;
application reduces the amount of heavy metals and chemicals accumulated in plant tissues and fruits;
the rooting period is significantly shortened;
helps crops survive adverse weather conditions, such as: drought, cold, insufficient lighting, excess moisture.

Note: Zircon works well for cut plants, allowing them to stay fresh longer.

Features of the drug and composition

Natural regulator made from Echinacea purpurea - a plant with immunomodulatory properties.
Part Zircon is included:

complex of hydroxycinnamic acids and derivatives thereof. The main action of Zircon is based on the active work of these substances.
alcohol. It serves to preserve the drug and stabilize the components in it.

Feature of the stimulant is the presence of biologically active substances: caffeic, chlorogenic and chicoric acids, as well as ester compounds. Thanks to them, the drug is a universal remedy that provides a wide range of actions.

Instructions for use of the drug Zircon

Zircon has a broad spectrum of action. At the first stage, during planting, it should be diluted in a ratio of 1 ampoule per liter of water to soak the planting material, while you should adhere to the following rules:

bulbs and roots must be aged for 24 hours;
cuttings and cuttings are enough to hold for up to 12 hours;
for vegetable seeds, it will take time from 10 to 15 hours.

Supportive feeding from Zircon is prepared in the ratio of 1 ml of the preparation per liter of water. The leaves are sprayed with the working solution using a herbal broom. This process must be completed before the onset of budding (for fruit trees) and the appearance of ovaries (for vegetable crops).

Instructions for use of the drug Zircon

When processing vegetable crops, you must follow a number of rules:

potato processing is carried out after the seedlings have appeared completely and have reached a height of 15-20 cm;
cucumber processing begins when the third and subsequent leaves appear, but must be completed before flowering.

When fighting pathogenic microflora, Zircon should be diluted in water in a ratio of one and a half ml to 10 liters of water.

Important: The ready-made working solution of Zircon should be used on the day of preparation.

If it becomes necessary to preserve the solution, then the maximum period should not exceed three days. Storage should be carried out in a dark room, the water should be acidified by adding citric acid in a ratio of 1 g to 5 liters of water.

How to properly work with the solution

The drug Zircon has a hazard class 4. It is used in beekeeping farms. For an effective result, you must adhere to the principles of fertilization.

The ready-made Zircon fertilizer solution must be used immediately;
The remainder is allowed to be stored for three days in a dark place;
The liquid is stored outdoors for only 24 hours;
For storage, 1 mg of citric acid or 1 ml of lemon juice is added to a solution with a volume of 5 liters;
Plants are sprayed in the evening, in calm, calm weather, or in the morning, before sunrise;
When working with Zircon and other fertilizers, you must follow safety rules.

Plant biostimulants are valued for their mild effect and environmental friendliness. They speed up the growing season and improve the soil.

Zircon for flowers

The drug is used for indoor garden plants.

The drug is often used for indoor or garden plants, as well as for ornamental plants. Its effect on flowers is very favorable:

noticeably accelerates the onset of flowering;
has a preventive effect on ovary shedding;
prolongs the life of cut bouquets;
accelerates root formation;
contributes to the fight against diseases such as powdery mildew and downy mildew.

The effectiveness of Zircon at home is due to great difficulties in creating the desired microclimate in a city apartment, where a number of adverse factors associated with dry air, its uneven circulation, waterlogging of the soil destroys the immunity of flowers and leads to the development of diseases.

Zircon is useful for indoor flowers at different stages of their growth. A solution prepared by diluting an ampoule of the drug in a liter of water after infusion for 14 hours will help accelerate the growth of cuttings. To increase the buds of bulbous plants, the solution is also prepared, but insisted for a longer period, up to a day.

When watering home flowers, a safe proportion of the solution will be the ratio of 1 ampoule to 10 liters of water. Such a solution will be universal for all plants grown in flowerpots.

How is the treatment with Bordeaux liquid in the fall, and other useful tips.

The drug bud, its application and purpose, see here.

Zircon is incredibly effective at growing the most capricious flowers., for example, such as orchids, which he literally saves from drying out the roots, yellowed foliage, with the manifestation of signs of pathogenic microflora, and also noticeably accelerates the onset of flowering.

Attention: When growing flowers, the concentration of Zircon should be slightly higher than in the solution prepared for processing vegetables.

The benefits and harms of growth stimulants for plants

Zircon is used for plants at all stages of its growth. The drug is used to:

Get a healthy plant that blooms and yields well. At the initial stage of its growth, as seeds or cuttings, they are stimulated to increase the protective forces.
Acting at the cellular level, the agent increases vital signs without harming the health of the plant.
Its use leads to the fact that there are less heavy metals, pesticides and other harmful components in the fruits.

The preparation is suitable for application to any kind of garden or indoor plant.

Also the stimulant has disadvantage:

Its high concentration and constant use can lead to insufficient absorption of other nutrients from the soil. Increased plant growth will lead to lower yields.
The composition of the drug is flammable and irritating to the mucous membrane of the respiratory tract.

Stages of using zircon for garden plants

Follow the rules when treating garden plants with zircon.

When processing planting materials with Zircon, certain rules should be followed:

processing of bulbs, tubers, seeds and cuttings should be carried out in a solution of 20-23 degrees;
a solution for treating cucumber seeds is prepared at the rate of 5 drops per liter of water; the seeds are soaked in it for 7 hours;
for the treatment of seeds of other vegetable crops, proportions of 10 drops of the drug per liter of water are used; soaking is carried out for 7 hours;
seeds of flower plants are soaked in a solution prepared by mixing the contents of 1 ampoule of the drug (30-40 drops) and a liter of water; soaking is carried out for 6-8 hours;
working solution for potato tubers is prepared in the ratio of 20 drops of Zircon per liter of water; in this amount, 100 g of root crops can be soaked;
any other bulbous cultures are soaked for up to one day in a solution prepared from a liter of water with the addition of 40 drops of Zircon;
cuttings of roses, like fruit trees, are soaked in a solution prepared in the ratio of an ampoule of the drug per liter of water; soaking is continued for 12-13 hours;
for the treatment of plant shoots, a solution is prepared at the rate of 20 drops per liter of water, in which the plants are kept for a day.

Seed Soaking in Zircon

You can treat any plants with zircon, as well as seeds, cuttings, bulbs, tubers, rhizomes, etc.

Soak very well in Zircon solution seeds before sowing... The drug has a positive effect on them:

soaking the seeds in Zircon activates the germination and growth process;
sprouts wake up and germinate much earlier, begin to develop faster;
get high immunity and resistance to changes in weather, climate, transfers, etc.;
acquire resistance to chemical changes. soil composition.

Dosage for seeds differs depending on the size of the seeds:

cucumbers: 200 ml of water - 1 drop of Zircon;
for seeds of other vegetables: 2 drops per 100 ml of water;
for flower seeds: 3-4 drops per 100 ml of water.

Seeds should be soaked in solution for 7-8 hours in any container.

Compatibility of Zircon with other fertilizers

The drug has good compatibility with fertilizers of organic and mineral origin, used in pest control, for prophylactic and therapeutic purposes. Zircon significantly enhances the action of pesticides, fungicides and insecticides.

Attention: An exception when mixing Zircon with other preparations is alkaline fertilizers, the activity of which will neutralize its beneficial effect.

Before mixing, the drugs are usually tested for compatibility by first adding small amounts. The resulting sediment will indicate the impossibility of combining them.

Be sure to remember: general rules for using the drug

For a biostimulant to work, it is important to know how to use it. Efficiency depends on the correct preparation of the solution, compliance with the processing technology, etc. Novice gardeners and florists usually have a lot of questions about the use of biostimulants. We tried to give answers to the 4 most common:

How to make a solution? The drug is an oily liquid. A solution is made from it: just add to ordinary water, stir with a stick. The biostimulant is produced in ampoules. One is one milliliter or forty drops. The dosage is selected for a specific plant: you need to look at the instructions. It is imperative to prepare the solution in a room where there is a minimum of light. The sun's rays neutralize the effect of the key substance of the drug, making it a "dummy".
What kind of water to use? They take ordinary tap water, but it is advisable to boil it in advance and cool or defend it. If the water is alkaline, then the destruction of the active components of the drug may occur and there will be no effect from the use. To maintain the effectiveness of the oily liquid, when preparing the solution, it is important not to forget about acidification. This will neutralize the alkali. For acidification, they take what is in every kitchen - ordinary food citric acid. A five-liter bucket will require one gram of "lemon".
When to process? The biostimulator can be used at any period of plant development: from seed preparation to the formation of the ovary. The main rule to follow is to spray the "green pets" after sunset. Otherwise, the sun's rays will quickly nullify all your efforts. The procedure cannot be carried out on a rainy day: precipitation will simply wash away the biostimulant.
Can the products be mixed? "Zircon" is essentially an immunomodulator, it does not heal the plant, but helps it develop, resist diseases and recover from ailments. If the plant is sick or affected by pests, it is imperative to use drugs for treatment and means to combat dirty tricks. The popular biostimulant can be used in parallel to speed up the healing process. The phytohormone feels comfortable with medicines and insecticides, moreover, it enhances their effect. However, it is important to remember that the drug does not tolerate alkali, therefore, it is strictly forbidden to mix it with dressings or chemicals that have an alkaline reaction.

There is a simple way to check the compatibility of a biostimulant and any other drug: you need to mix them and see if there is any sediment. Its presence signals that the tandem will not take place.

Safety of use

Use protective equipment when working.

Zircon is a low-hazard substance. Represents the 4th class of danger for people and warm-blooded animals. Does not pose a danger to bees and beneficial insects. Refers to non-phytotoxic drugs, does not stay in the soil and does not have a polluting effect on water bodies, incl. does not harm ground or surface waters.

When handling, follow the usual precautions that should be followed when using any chemicals:

carry out work in a protective mask or respirator;
use gloves and goggles;
wear special clothing (rubber boots, bathrobe, headwear).

After carrying out all the work, thoroughly wash your face and hands with soap, rinse the mouth, take a shower and change clothes.

During work with the drug, it is forbidden to drink and smoke, to eat.

In order to prepare the solution, the use of food utensils is prohibited.

In cases of spillage of the drug, it is necessary to pour sand into this place, and then collect it and discard it.

Educational program on processing methods and dosages

The solution of "Zircon" is made in different dosages. It all depends on the processing method, the type of plants that need to be stimulated, etc.

You can experiment with dosages. It is believed that a biostimulant cannot harm a plant. But you should not overdo it too much, as well as reduce the amount to a minimum: in the first case, there is still a possibility of not having the best effect on the plant, in the second, not getting the desired effect. Let's try to figure out how to dilute the drug so that it brings maximum benefit.

Pre-planting soak

Seeds, tubers and bulbs are soaked in the solution of "Zircon" so that they germinate faster, give strong sprouts and have immunity to diseases. Experienced gardeners are advised to adhere to the following dosages:

Seeds. Prepare a solution of 100 grams of soft water and four drops of the drug. Soak for about eight hours.
Potato tubers. Half the ampoule is dissolved in a liter of water. Potatoes are kept in the resulting solution for 6 hours. Drug consumption: liter per hundred kilograms.
Bulbs, cuttings, corms. A whole ampoule of biostimulant is added to a liter of acidified water. Cuttings withstand at least 12 hours, everything else - no more than an hour.

Spraying

Spraying is the most common treatment for plants with biostimulants. It captivates with its versatility: it is suitable for absolutely all representatives of the flora. The main thing is to know the dosages for each floristic group.

Vegetable crops

"Inhabitants" of the garden are treated with "Zircon" several times per season. Usually, the first time they stimulate the seedlings, the second - the buds. Plus additional processing if necessary: if vegetable crops have survived a drought, pest attack, etc.Each plant has its own optimal dosage and ideal processing time:

Cucumbers. The optimal dose is one ampoule per bucket of liquid. The first procedure is carried out when the culture forms the first pair of leaves. Re-processing - when budding.
Tomatoes, peppers, eggplants. The dosage is the same as for cucumbers. The newly planted seedlings are sprayed. Tomatoes are processed during flowering, pepper and "blue" - when the first buds appear.
Cabbage. Only 15 drops of the drug are required for a bucket of water. Stimulation is carried out when the head of cabbage begins to tie.
Potatoes. Dosage as for cabbage (almost half an ampoule per bucket). Only hatched seedlings and bushes with buds are processed.
Zucchini, watermelons, melons. For these crops, it is better to use a weak solution: three buckets of acidified water + one ampoule. Spraying is carried out twice: when three leaves (full-fledged) are formed, and when buds appear.
Roots. Use the minimum dosage: only eight drops are required per ten-liter bucket. Seedlings need to be sprayed as soon as they show their "tops".

Fruit trees

In order for the fruit trees to feel the full force of the drug on themselves, they must be completely moistened with a solution. Usually, a large tree takes about ten liters of solution, and a young specimen - half as much. Prepare a solution for the most frequent "inhabitants" of the garden as follows:

Pear, apple tree. A whole ampoule of the drug is dissolved in a ten-liter bucket. They are processed in the budding phase (preferably immediately), again - two weeks after flowering.
Stone fruits (cherry, cherry plum, sweet cherry, apricot). Ten liters of liquid will require two ampoules. Spray during bud formation and after flowering (wait two weeks).

If conifers grow in your garden, treat them with a biostimulant as well. Especially in summer, when the needles become unsightly. For conifers, the dosage of "pear, apple" is suitable, but spraying should be carried out much more often - with the onset of heat every two weeks.

"Inhabitants" of flower beds and window sills

Ornamental crops growing in a flower bed and indoor flowers require mandatory stimulation twice: during the period when leaves and shoots begin to grow, and in the phase of bud formation. The dosage for these periods is different. For the first - an ampoule for ten liters, for the second - two for the same volume. For very young specimens (up to two years old), half the packing capacity is enough.

Ornamental plants should be handled carefully. It is necessary to cover the "pet" completely with the solution, but not to fill it in: excessive moisture is not necessary for the "inhabitants" of flower beds and window sills.

Watering the soil

In addition to soaking planting material and spraying flora representatives, there is another way to use a biostimulant: watering at the root. They turn to this method to give the plant strength to fight pests living in the soil, protect it from fungus, and stimulate the development of rhizomes. The solution for irrigation is prepared according to a single dosage: an ampoule of phytohormone in a bucket of acidified "lemon" water. This volume is enough to water a square meter of vegetable beds. It will take half a bucket of solution for one berry, and a couple of buckets for one tree over five years of age.

The watering method has a clear time frame. You can start processing under the ground in early June, and stop no later than mid-July.

And finally: "Zircon" belongs to the fourth group of danger. This means that it is not capable of harming humans, animals, or beneficial insects (including bees). However, this does not negate the fact that standard safety measures when working with the drug must be observed: prepare the solution in a non-residential area, protect your hands with gloves, use a respirator and try to minimize skin contact with the concentrate.

First aid

If Zircon gets on your skin, rinse it thoroughly under running water. In cases of contact with eyes, rinsing will be required first with a soda solution (1 tsp per liter), and then with water.

When the stomach is swallowed, it is necessary to induce vomiting by first drinking several glasses of water, and then take an absorbing drug, one of which may be activated carbon.

Important: Despite the fact that Zircon does not pose a serious health hazard, nevertheless, in cases of contact with the skin or swallowing, prompt action is required.

What plants is Zircon suitable for

Zircon is used for absolutely any plants:

flowers (indoor, garden, bulbous, corms);
vegetable crops (tomato, peppers, cucumbers, zucchini, cabbage, root vegetables and other vegetables);
fruit and berry crops (garden strawberries, strawberries, gooseberries, raspberries, currants, apple trees, pears, plums, cherries and other shrubs and trees);
indoor flowers (leaf and flowering crops).

Attention! It is also useful for restoring lawns and extending the life of cut flowers in bouquets.

Reviews of the drug Zircon

Alexandra. After I discovered Zircon for myself, now I cannot imagine the processes of transplanting or rooting without it. There are a lot of exotic flowers in my home greenhouse. It is especially difficult for them to adapt to the conditions of our climate. They often dry out and may turn yellow or black. Zircon is a real ambulance! Although extremely effective, it is not addictive. It is excreted in less than a day. Perfectly stimulates root formation, promotes root formation after transplantation. I use it for watering and spraying. I always keep it close at hand and recommend it to everyone - an excellent preparation!

Ksenia. I got acquainted with the action of Zircon when growing cabbage. He helped me a lot, when for a long time instead of heads I had only huge "burdocks", and the cauliflower did not want to form evenly. In addition, no remedy helped against rot and other pests. For all these cases, Zircon is simply irreplaceable! I usually dilute an ampoule in 10 liters of water. I spray the seedlings with them once every two weeks, and then on the eve of the planned planting. If the soil is contaminated, spraying can be done more frequently. It is necessary to monitor the abundance of wetting the leaves. All these actions will ensure a healthy and beautiful harvest.

Fertilizer for orchids, bona forte, its method of application and purpose, details on the link

Learn how to properly use colloidal sulfur.

Olga. Zircon is a great drug. Used it for my dying dracaena. Thanks to the drug, brand new roots quickly grew, and the plant was reanimated. Now I often use it even for prophylactic purposes, as well as to accelerate plant growth and during transplantation. I always keep Zircon at hand - it is my most irreplaceable assistant!

Zircon for seedlings. First-hand application

For seedlings a solution is prepared at the rate of 4 drops of Zircon per 1 liter of water.

The emerging seedlings are carefully watered from a syringe between the rows, just a little bit 1 time in 3 days, for 10 days. I also spray fragile leaves: I shake off a few drops of the solution on the emerging seedlings with a brush for watercolors.

Be sure to water and spray the seedlings with a solution a couple of days before planting them in the ground. I also pour a little Zircon solution into the holes (2-3 tablespoons), then I plant the bushes. The survival rate is almost 100%. 4-5 days after planting, I water and spray young plants.

With the help of Zircon, any cuttings are very successfully rooted. Plants take root well after transplantation.

In the second half of October and in the first decade of November, I water the roses with Zircon: once every 4-5 days. Pour the solution directly onto the branches so that the liquid flows down the remaining leaves and branches to the root.Roses treated in this way perfectly tolerate any winter "surprises" in the form of a sharp drop in temperature, severe frosts, and thaws. In addition to roses, I also process all the "heat-loving sissies".

I also spray the roots of those plants that I transplant with Zircon, as well as those that are sick.

Attention! It is imperative that if the plant is watered with Zircon or Epin, at the very beginning, before processing, the soil should be well moistened so that the root system of the plant does not get burned.

I try to process plants with Zircon in the evening, in calm weather, I definitely look at the forecast in order to process crops a couple of days before the rain.

Good weather and rich harvests!

The article was prepared by: Melnikova Lyudmila, Belgorod

Analogs of the remedy

The biostimulant zircon is definitely beneficial for plants, but it is not always available on the market. Since it is popular. Spraying is allowed with other growth stimulants:

Ecosil and Epin;
Sprout and Amulet;
Narcissus and Crezacin;
Kornevin and Immunotocyte.

The most productive and effective qualities, similar to zircon, are characterized by Baikal EM-1 and Athlete. They also contain useful substances, are pure growth regulators.

What is Zircon for?

The uniqueness of the Zircon product lies in the fact that it has a huge range of uses:

processing of pre-sowing material, in other words, seeds for planting, due to which the seeds germinate faster;
normalization of the temperature level in case of strong changes;
mitigation of "negative" reactions after changes in soil composition (for example, as a result of fertilization);
helps seedlings quickly and without problems take root in a new place, so to speak, "put down roots";
helps houseplants as a prophylactic agent against fungal and bacterial attack.

It is interesting:

The use of the Zircon stimulant is not limited to the field of horticulture. It is actively used in medicine because of the HCC (acids), which have an extremely beneficial effect on all organisms, except for the spores of fungi and bacteria.

ZIRCON growth accelerator. How to use it correctly - video

Storage rules, cost and analogues

The biostimulator Zircon is an inexpensive tool: one ampoule costs from 13 to 25 rubles. One liter of working solution is sufficient for treating a sufficiently large area.

To store the funds, you will need a non-damp room, with a temperature no higher than + 25 degrees. The ampoule must not be frozen. The expiration date of the immunomodulator is indicated on the package.

There are several analogues in agricultural stores:

Each drug has specific properties and different active ingredients. Some products are more suitable for stimulating root growth, others for a complex effect on plants. When choosing the best remedy, you need to consult with the consultants of the agricultural store, describe the problem with specific plants. Fitosporin and Zircon are universal remedies, suitable for eliminating many negative factors.

Solution preparation

The fertilizer instructions for zircon say that the solution cannot be stored for a long time.... That is why it should be prepared just before use. The water must have a temperature of at least 18 degrees, and also be clean. Before opening the package, the substance must be shaken thoroughly.

After that, it is worth mixing the two substances in an enamel, plastic or glass container. In no case should a galvanized container be used, since the solution may react with it.

If you use the entire drug, then the container should be rinsed with tap water and poured into the solution. After that, the mixture is well mixed. Care must be taken to ensure that there is no sediment.At the end of the preparation of the mixture, add 1 gram of citric acid per 1 liter of the mixture. Only after that the seeds are put into the composition.

Depending on which method of caring for the crop was chosen, you can pour the composition into a watering can or sprayer.

How to make a fertilizer for flowers based on Zircon

To make a suitable nutrient mixture for plants, you need to take 0.1 liter of water and only 1 - 2 drops of the preparation. Next, the same amount of the selected and compatible fertilizer is applied. Stir thoroughly. There should be no sediment.

Attention:

it is impossible to combine Zircon with alkali fertilizers, because as a result, the positive effects of the drug do not appear. They are blocked.

At the flowering stage, they are used independently, separately from other preparations, simply by spraying the plants.

Why do you need to water orchids with zircon? - video

Safety measures and storage conditions

It is forbidden to prepare a more concentrated solution than indicated in the instructions for routine processing. It is allowed to increase the dosage by 1.5 times if it is necessary to treat plants affected by fungi. Any processing is carried out exclusively in cloudy weather, so that the rays of the sun do not fall on the leaves. Work is carried out with gloves, it is not necessary to use other protective equipment.

You can store Zircon for 3 years in warmth (but not higher than 25 ° C), dark and dry. There should not be any medicines or food near the packaging; biological products should be inaccessible to children and animals.

An already prepared solution is stored no longer than 1 day, it must be used on the day of dilution.

Packaging of the drug

Zircon is "packed" in plastic ampoules with a volume of usually one milliliter, if you count this into drops, for lovers of accuracy, you get exactly forty drops.

Naturally, such a "container" is intended for private gardeners, scientific institutes and large farms never buy "Zircon" in ampoules and never use such insignificant volumes. For such enterprises, "Zircon", like other similar preparations, is provided packed in cans and bottles up to two dozen liters, no more, because it is very difficult to carry larger containers.

When buying "Zircon", be sure to place it in a dark and dry room, where the temperature does not exceed 25 degrees above zero. The drug is stored for three years.

Ways of using the preparation - what does the treatment of plants give?

This biostimulant is not used in its pure form. On its basis, an aqueous working solution is made, which can be used in different ways. Seeds and cuttings are soaked in it, plants are sprayed with it and even watered. Treatment with this biostimulant provides:

improvement and acceleration of seed germination (this is especially noticeable on seed with an expired shelf life), as well as faster germination of seedlings;
stimulation of the formation and development of the root system of cuttings;
acceleration of development and growth of seedlings - the period of formation of viable seedlings ready for planting in unprotected soil is reduced by an average of 5-10 days;
increasing the resistance of seedlings to a number of diseases (including black leg), insufficient illumination and humidity, recurrent frosts;
reduction of the rooting time by about a week, both for cuttings and transplanted adult plants;
activation of the formation of roots, shoots, ovaries and fruits;
prevention of fungal and bacterial diseases, as well as faster and more effective control of plants with them and recovery after measures to destroy pests;
reducing the time for the appearance of flowers and counteracting their shedding and ovaries;
increasing the yield of all crops by 30-60%;
the onset of maturation 5–10 days earlier than in untreated plants.

In addition, Zircon provides protection and excellent recovery of crops from stresses caused by drought and waterlogging, heat and frost, lack of light and ultraviolet radiation, as well as the use of chemicals (fertilizers and pests and diseases) and changes in soil composition. And as a fertilizer, this biostimulator is much more economical than all known fertilizers, which really are.

How to use the drug

Zircon is low-toxic, belongs to the 4th hazard class. But this does not mean at all that application to the soil or cultivation does not require a special approach, calculation of the dosage for different types of plants.

Spraying is different from watering or preventive maintenance. Therefore, before using it, be sure to study the instructions, rules of use, application.

Calculation of dosage for watering

To breed zircon as top dressing is according to a strictly defined scheme. The tool belongs to the universal, and takes the first places in use. The purpose of root feeding: biostimulation during the growing season, prevention of stressful situations.

Dilution: the calculation is carried out for 10 liters of liquid = 1 ml of zircon (1 ampoule). Water strictly at the root so that the substance acts instantly.

The beneficial effect is observed when the diluted substance is used on the same day. Otherwise, the required qualities are lost by 65% or more. It is not recommended to exceed the dosage. Less concentration is better than excess. Without fail, the water for dilution must be 20-25 degrees.

Pest control

The manufacturer indicates the peculiarities of the use of the substance in stressful situations. These include diseases, damage to the green or root part of the plant. Zircon is used not in pure form, but as an additive to the basic product.

The solution should be prepared in a standard way: 1 ampoule of zircon is added to a bucket of water with the product. Check the compatibility of the substances before use.

Signs of overdosing

A plant growth stimulant can not only help / accelerate plant growth, but also cause harm. This warning applies when combined with other organic or chemical solutions for feeding in the spring, when pests, pathogenic microbes are destroyed.

Problems will be caused only by the substance that is the main one. Overdose symptoms vary according to the fertilizer used.

By itself, zircon is not harmful to the plant. Although it can not only accelerate the growth of vegetables, the taste of which deteriorates, that is, they become tasteless.

Interesting fact! When you add 2-3 drops of zircon to a vase with a bouquet of color, you can keep the flowers alive for a long time, blooming, without falling leaves, petals.

New fertilizer - zircon

The tool is called fertilizer, but this formulation is only partly correct. In fact, it is an active biological stimulant with a diverse spectrum of activity. The biostimulant contains no fertilizers, it is produced on the basis of natural ingredients.

Why is this not a fertilizer, what are its components

The biostimulant contains ordinary ethanol with the addition of a number of hydroxycinnamic acids. Their concentration is minimal - 1% per liter. Hydroxycinnamic acids in the biostimulant are represented by echinacea purpurea, caffeic and chlorogenic acids. They are obtained from herbs that belong to the Astrovian class. The smell of the biostimulant resembles an alcohol solution, the shade is light green.

At the stage of dilution of the biostimulator with water, to obtain a ready-made feed, foam may appear on the surface, this is a completely normal reaction. By the way, the manufacturer recommends using melt or rainwater. In terms of its organic matter, it is many times softer than filtered.

An important fact is that it is necessary to mix a biostimulator for irrigation in a basement or warm room. Aggressive, direct rays of the sun will affect the activation of the components, and they will lose their properties. It is also necessary to process cultures with a ready-made biostimulant before or after sunset.

Precautions when working with "Zircon"

We said above that this drug is absolutely safe, but a person may have allergic reactions to the components of the drug, so you need to dissolve the drug in a non-living room, wear rubber gloves, a respirator and a dressing gown to minimize exposure to open areas of the body. The room must be ventilated. Before and after using the drug and, of course, during its use, you must not drink any liquids. After using it, rinse your throat, only then you can drink and eat, of course, before taking a shower and changing your clothes.

If you are already familiar with "Zircon", please share your experience of using it with the readers of "Botanichka" in the comments to the article.

Preparation of the solution

The procedure is simple, there are no specific requirements. There are several nuances that it is useful to learn about for all flower growers, gardeners, gardeners.

Rules:

Prepare plastic containers, metal containers should not be used. If 1 liter of liquid is enough, then a glass jar is suitable.
Calculate how much working solution is needed for 1 liter.
Proportions. The standard norm is for 1 liter of clean, slightly warm liquid - one ampoule of Zircon, which contains 1 ml of a biostimulant. When treating plants from fungal diseases, for spraying, a product of a different concentration is prepared: for 1 liter of water - 1.5 ampoules of the drug.
First, the contents of the ampoule are poured into the container, then water is gradually added, the solution is stirred with a wooden or plastic spoon.
The immunomodulator for plants is safe and non-toxic, but you still need to wear medical gloves and open the window. When spraying fruit trees, garden plants and berry bushes and vegetable beds, it is useful to wear a respirator, plastic glasses, so that biostimulant particles do not get on the skin and into the respiratory tract and eyes.

How zircon works on plants

The acids that make up the drug activate auxins - plant phytohormones, due to which its effect as a stimulator of growth and root formation is achieved. According to the manufacturer, Zircon is a root former, a stimulant of flowering and fruit formation, protects plants from heat and drought and excessive ultraviolet radiation, infection with pathogens.

Fruits harvested from processed plants ripen faster and are stored longer. The quality of fruits and berries, vegetables increases, as well as their quantity, the yield increases (by about 50%). When added to water solution of Zircon for cut flowers, it prolongs their freshness.

The biostimulant has an effect on plants throughout the growing season - from the moment of planting to full harvest.

Precautions with biostimulant

As mentioned above, this agent is absolutely safe for humans, but allergic reactions to the components of the drug are quite possible, so it must be diluted in a non-residential area, protecting hands with gloves, putting on a dressing gown and protecting the respiratory system. This is the only way to minimize the contact with the open areas of the body. The room needs to be ventilated. It is forbidden to drink or eat during the mixing stage. After all the manipulations, it is important to rinse your throat and take a shower.

Important additions

When using a biostimulant, it is necessary to adhere to the main rule: it is better to underfeed the plant than overfeed it. It is better to use the minimum concentration, but more often than once every six months, pour a bucket of composition under the tree. 12 liters.water, only 40 drops of biostimulant are used, maximum 45. If the liquid in a bucket or ampoule is divided into balls, it must be mixed by shaking or stirring.

If you cannot obtain melt water or rainwater, it can be slightly acidified with lemon juice or acid to reduce the alkali percentage. It is also not recommended to mix the concentrate in a zinc container.

It is important to use a biostimulant together with mineral and organic supplements. Alone, they are completely ineffective, since the root system instantly "absorbs" useful components from the soil. Before applying the fertilizer, a compatibility test is carried out. A small amount of concentrate and other fertilizers are mixed: if a ball of sediment appears at the bottom, it is irrational to combine them. It is also best not to use a concentrate with lye, as it will reduce its effect.

Orchids and biostimulant

If orchids do not bloom for a long time, a biostimulant will come to the rescue. The price allows you to use it for home use or even in large-scale greenhouses.

The most whimsical orchids respond favorably to a biostimulant. Illiterate transplantation, excessive or minimal watering, unstable humidity, and simply rearranging the plant to another place can provoke its death. But an effective remedy for orchids is being sold - a biostimulant. If the roots are dry, the leaves are covered with bloom or yellow spots, with the development of pathogenic microflora, the concentrate is the best remedy for flowers. You can also purchase a concentrate for orchids, if their long-awaited flowering has not come - the biostimulator activates their appearance.

Now read:

Ways to store carrots in winter so they don't rot
Description of 12 types of late varieties of cabbage for planting
Exquisite junkus (sitnik) spiral in the interior
Confidentiality

About

Agronomist of the state agricultural enterprise "Garovskoye" of the Khabarovsk region of the Khabarovsk region.

Application area

With the help of the Zircon preparation, the gardener, the summer resident provides a restorative and preventive procedure for his plants. Each type of plant requires a special attitude towards itself, which means that the introduction of any means is different. It is worth taking into account the moment of introduction. For seeds and when planting seedlings in the ground, the dosage is different.

As a seedbed fertilizer

The zircon solution is supposed to be introduced into the soil during sowing. Seeds, tubers, roots accelerate root development. After applying zircon, the volume of the roots increases threefold.

The liquid penetrates the seed coat, stimulating germination and energy. The best option for pre-sowing top dressing is drip application and dilution. Soaking times are different.

Soaking is carried out in water not lower than 25 degrees. Plants are treated in the same way after flowering: taking into account the drops, the type of plant and culture. A different ratio for dilution in water of the drug is provided for spraying.

Precautions

Zircon belongs to the 4th hazard class. This means that it is safe for the plants themselves, it does not accumulate in their green mass, fruits and in the soil. But this does not mean that you can work with the drug without protective equipment, because the ingress of any drugs inside can cause poisoning. Therefore, for spraying with Zircon, use:

Important! If the product is ingested, induce vomiting and flush the stomach, seek medical attention. If it gets in your eyes, rinse them with a baking soda solution. And if you have come into contact with the product with bare hands, then wash them with soap and running water.

The main advantages of Zircon

They are based on the effect of this drug on plants, which is clearly visible on treated plants as compared to untreated plants. Zircon preparation:

activates seed germination, survival of seedlings, seedlings after transplantation;
activates and regulates plant growth;
increases the endurance of vegetable, fruit, berry and flower crops to sudden temperature changes;
rejuvenates plant tissues as an antioxidant, restores them after damage;
increases disease resistance;
softens the effect of mineral fertilizer solutions on plant roots;
reduces the accumulation of nitrates in tissues;
stimulates flowering;
prevents the shedding of the ovary;
there is no waiting period, the fruits are usable immediately after processing (they just need to be rinsed well in running water before use).

The tool is economically consumed, has an affordable cost.

Indoor Plants Application

The use of the useful additive Zircon is also popular in home floriculture.

The bioregulator has a beneficial effect on indoor flowers and plants:

stimulates growth and development;
accelerates flowering and prevents wilting;
strengthens the root system;

enhances the impact of other means;
strengthens the immune system in the fight against infections and pests.

To care for indoor plants, 2 methods of treatment with a solution of the drug are used: watering and spraying.

It is necessary to water with the prepared concentrate in the proportion of 1 drop of the dietary supplement per 250 g of water. Watering using the product is carried out once a week.

Spraying is carried out once a month to prevent infectious diseases and pests. To prepare the solution, you need 5 drops of Zircon per 1 liter of water.

Important: spraying indoor flowers is carried out at low and normal humidity levels.

Zircon is indispensable for the care of exotic flowers such as orchids. Whimsical plants are very sensitive to any negative influences and demanding care. Zircon treatment allows exotic flowers to look well-groomed and healthy, to delight with their beauty for a long time.

Probable harm and precautions

Zircon is a safe biostimulant; the product does not contain toxic substances. Subject to the rules for preparing the working solution, following the instructions for use, problems practically do not arise. An immunomodulator based on hydroxycinnamic acids is safe even for sensitive insects such as bees. Reviews about Zircon are positive.

The biostimulant does not harm water bodies and the substrate, is not toxic, does not accumulate in the underground and aboveground parts of plants. If the contents of the ampoule (before dilution in water) spilled on the ground, then you need to immediately remove (dig out) the wet part of the substrate: Zircon changes the structure of the soil.

Chemical formula and principle of action

The most surprising thing about the preparation is that it does not include traditional feeding elements such as potassium, nitrogen or phosphorus. The essence of Zircon is to enhance the action of these substances. Also, the agent has the ability to awaken the internal reserves of the plant and stimulate cells and tissues to actively divide (Figure 2).

Note: Zircon is not used as an independent fertilizer, but only in addition to dressing for indoor plants.

In this case, the tool is considered a very effective biological supplement:

Presowing seed treatment helps to speed up germination, and seedlings appear much earlier than with conventional sowing.
The active ingredients of the drug strengthen the immunity of plants. As a result, they become less susceptible to temperature changes and other negative environmental factors.
Zircon can be used to treat seedlings and cuttings. Thanks to this, the planting material will take root much faster and adapt to a new place.

Figure 2. The tool increases the immunity of seedlings, seedlings and adult plants
In addition, this drug is also suitable for prophylactic treatment of indoor plants and horticultural crops.Thanks to this spraying, young and adult plants are much less likely to be affected by fungal and bacterial diseases.

Description of the composition of Zircon

The drug is made from the perennial medicinal herb Echinacea purpurea.

The principle of action is achieved due to biologically active extracts of hydroxycinnamic acids dissolved in ethyl alcohol 0.1 g / l (coffee activates growth processes; chicory and chlorogenic have antioxidant properties).

The development of biological feeding belongs to the Russian production association NEST M, which has established the following release forms:

For the preparation of an aqueous solution at home and in personal plots, plastic ampoules of Zircon with a volume of 1 ml (40 drops) are used.
The company also manufactures a ready-to-use liquid product, which is packaged in one-liter bottles, cans of 5, 10, 20 liters.

What is zircon for plants and features of its application

Your favorite fuchsia on the windowsill or the new cherry tomatoes, on which you had high hopes, do not want to settle down and start blooming in any way? Have the fresh green leaves darkened and the plant wilted? Do not despair, your efforts were not in vain!

It's just that the poor people don't have enough energy, it's hard for them to cope with stress. And what is the best cure for all diseases? That's right, healthy foods. But in plants it is not fruits and milk, but fertilizers and growth stimulants. But of course you have already thought about fertilizers, let's better see how stimulants can help us. One of the most common and affordable is "Zircon". What is it, how can it be useful or dangerous, and how much does it cost? We'll find out now.

For what and in what cases they are used

Biological growth stimulant Zircon is used in the presence of problems and negative conditions:

the plant has suffered stress during weather changes, changes in the microclimate in the home, after transplantation;
weak bloom or lack of buds in Orchids and other flowers;
damage to the roots or poor growth of the underground part, especially in epiphytic plants;
on various parts of an ornamental-deciduous or beautifully flowering species, signs of a fungal, bacterial infection have appeared, or the plant is affected by a dangerous virus;
trees and shrubs do not bear fruit well;
it is necessary to activate the germination of planting material: seeds, tubers, bulbs;
the hostess decided to grow roses from a bouquet at home, and it is important to stimulate the formation of roots;
to increase yields in the beds;
recently completed a course of treatment of the affected plant from late blight, powdery mildew, black and gray rot, brown rust, and other infections that sharply reduce immunity;
for soil fertilization in combination with other mineral and organic products;
in indoor or garden flowers, the growing season is not as active as usual, there is a suspicion of a weakness of the root system;
a beautifully flowering or decorative leafy species was recently transplanted into a new flowerpot or on a plot.

Storage and use

Among the features of the drug there is a condition: it should be stored at a temperature of 25 degrees and above! Dry and dark. If "Zircon" is in powder form, then the period of such storage can be up to 3 years. But the prepared processing solution must be used immediately. You can extend the shelf life by adding citric acid to it at the rate of 1 g / 5 liters. But at the same time, the storage time of the mixture should not exceed 72 hours!

In order to dilute the product in water, use containers made of any materials, except for galvanized dishes - unwanted chemical reactions are possible in it, up to the formation of substances toxic to plants.

If, in the manufacture of solutions for processing the garden, you took not a powder, but a concentrated form (ampoules or bottles of a larger volume), thoroughly shake the containers with it before pouring into the water - at the bottom, undissolved, precipitated or crystallized fractions are possible at the bottom.

It is normal if, when diluting concentrates or powder, foaming of the solution is formed. This is the result of exposure to air and ultraviolet rays. Not critical, but because of these effects, it is better to breed the stimulant in a shaded room.

Composition of components

The preparation mainly consists of components of plant origin, such as caffeic, chicory and chlorogenic acids. These acids are produced in the plant - Echinacea purpurea.

Thus, the composition of zircon does not contain chemical elements and makes it possible to obtain fruits of vegetables and fruit crops with satisfactory taste.

Vegetable and fruit fruits grown with regular preparation treatments are optimal for processing and making baby and diet food. Plants can be used in pharmaceuticals for the production of medicines.

On sale, zircon is presented in the form of ampoules with a volume of 1 milliliter, sometimes in plastic bottles with a volume of 1, 5, 10 and 20 liters. The biostimulator has the smell of alcohol, when it is diluted with water, foam appears, as a result of which the solution acquires a yellowish-green color.

For an effective effect, it is recommended to spray with this solution early in the morning or in the evening. The fertilizer does not contain hazardous substances for living organisms. If rain is expected, then treatments should be postponed until better times.

Substance analogs

To strengthen the immunity of seedlings, horticultural crops and indoor plants, you can use not only Zircon, but also its analogues. For example, the "Athlete" growth regulator showed a good result for building up green mass. Humates containing salts of humic acids, which are extremely useful for plants, have a similar effect (Figure 8).

Figure 8. The main analogues of the drug

In general, in the modern market there is a fairly rich selection of biological stimulants for plants, but Zircon is still considered the most popular and effective, especially when it comes to indoor plants.

Advantages of the drug

In addition to the listed benefits of using fertilizer for plants, its safety for the environment should also be highlighted. The composition of the additive does not affect the vital activity of insects at all and it can be used even in beekeeping, as stated in the instructions for use. "Zircon" does not destroy the pathogens of viral or bacterial diseases, providing only a stimulating effect on the immunity of the plant itself. Thanks to this, crops can resist late blight, scab, powdery mildew, fusarium, bacteriosis and other common diseases on their own, without additional processing with synthetic substances.

The additive also enhances the process of absorption of nutrients and water from the soil, stimulates the growth of the root system, seedlings appear and germinate much faster. The drug is able to reduce the negative effects of direct sunlight and accelerate the adaptation of crops to new conditions.

In the instructions for the use of "Zircon" it is reported about its ability to increase crop yields, improve the palatability of fruits and accelerate fruiting.

Recommended Precautions

Zircon is classified as a low health hazard. However, contact of acid concentrate on mucous membranes, unprotected skin can lead to unpleasant consequences, as well as inhalation of industrial alcohol vapors.

Therefore, personal safety should be observed when spraying liquid. To do this, you need to use standard protective equipment, namely:

clothes should be made of thick fabric;
high boots on my feet, hands in rubber gloves;
remove hair under a headdress;
protect eyes with glasses;
cover mouth and nose with a respirator or medical mask.

While spraying plants, you can not interrupt for a smoke and food, take drinks or water.

In case of accidental ingestion, rinse immediately. If the agent has entered the intestines, it is necessary to induce vomiting and take activated charcoal. Rinse eyes and skin immediately with running water. At the end of the work, it is recommended to take a bath or shower, change clothes.

Zircon alternatives

The most common alternative to zircon is Epin.

Or, to be more precise, "Epin-extra", since several years ago the drug was taken off the market due to numerous handicrafts. Now there is no such problem, but be prepared not to find just the drug "Epin" on the shelves.

According to its properties, the drug is not much different from "Zircon", but nevertheless avid gardeners were divided into two camps. What drives them in their choice?

Epin vs Zircon - differences:

Zircon works to induce flowering, root formation and protect against viruses;
the action of Epin-extra is aimed at enhancing the plant's immunity to diseases and harsh conditions;
an overdose of Zircon is dangerous for the plant, it is better to use it a little, but often, and the Epin dosage is not at all so strict;

Epin tends to collapse in the light, therefore, its storage must be strictly observed in dark spaces, while Zircon, on the contrary, is activated under the influence of light rays;
due to the lower content of active substances, Epin's action is much slower - about two weeks, while Zircon takes less than a day;
Zircon, unlike Epin, is absorbed by the roots, so you can simply water the soil at the root of the plants with its solution;

Another, slightly less well-known drug - HB-101

Judging by the reviews, its action is more diverse, and the composition is much richer. However, the price is appropriate. The action of this drug, as it were, combines the properties of the previous two and adds some of its own.

In addition to active substances, HB-101 includes a line of minerals, the main of which is silicon. So in addition to stimulating plant growth, it is also enriched with beneficial substances.

The drug does not threaten overdose and contraindications, it can be used at any stage of plant development and in any way - soaking seeds, spraying foliage, watering the roots with a solution and others.

It is not destroyed under the influence of light.

Compatibility with other drugs

This drug has proven itself well in combination with inorganic and organic fertilizers, as well as other insecticides, fungicides and growth regulators. The effect can not be expected when combined with fertilizers in which the pH level is too high. You can not use it in combination with drugs such as:

Hydromix.
Fundazol.
Quadris.
Actellic.
Aktara.
Colloidal sulfur.
Copper oxychloride.
Thunder.
Bordeaux mixture.

In order to make sure exactly of their incompatibility, the preparations are mixed in 5 grams and diluted in water (proportion 1: 1000). If a precipitate appears, it can be considered that the combination is incompatible. In such a situation, these drugs cannot even be used simultaneously for one plant. There should be an interval of 7 days between their use.

Use during the growing season

To make the plant grow better, you can additionally spray it with Zircon once a week. Such dressings will be useful for crops that have survived cold, drought, stress, and have been infested with pests. The treatment should be carried out late in the evening or very early in the morning, before the sun appears. A prerequisite is the absence of rain and wind. Otherwise, the fertilizer will not be able to stay on the leaves.

Vegetable crops are sprayed after transplanting, when the first leaves appear and at the beginning of flowering. Melons crops - when leaves and buds appear. Root crops - when the first shoots appear. For more information about which crops, when to process, as well as the norms that must be observed when preparing a spray solution, you can find out from the table below.

Average market price

Of course, over time, the cost of any drug steadily increases, which is very saddening. And yet, zircon will be a very affordable tool for a long time, which is incredible given the amount of its useful qualities.

On average, the cost of this drug ranges from 10 to 20 rubles per 1 milliliter ampoule. Do not forget that even 1 milliliter is quite a lot, unless, of course, you have a huge vegetable garden.

In city stores, the price is usually higher, so if you want to save money, look for the drug on the Internet, there are always low prices.

Of course, it will be cheaper to buy in bulk.

For example, you can buy a 50 ml bottle, which costs about 300 rubles. Even based on the calculation of the minimum price for an ampoule, it is almost 2 times cheaper.

You can also purchase a 1 liter bottle of the drug. The option is perfect for avid gardeners with a large garden at home, for example. For years you will try to finish off this zircon in order to try something new, but the bottle will not end! Such a bottle costs about 5,100 - 5,500 rubles. For comparison, Japanese-made HB-101, which is sold in ampoules of 6 milliliters, costs about 200 rubles - almost twice as expensive.

Epin-extra is in the same price range as zircon.

Description of the substance

The solution itself is an almost completely transparent liquid with a characteristic smell of alcohol. According to the instructions, Zircon fertilizer should be used only in diluted form. Upon contact with water, the drug begins to foam, and the finished mixture turns into a light yellow color with a green tint.

The supplement is sold in 1 ml ampoules or in bottles from 1.5 to 20 liters, but you can find a large volume most often at wholesale points of sale.

A preparation is used for soaking planting material or spraying already growing crops in sunny, calm weather. It is better to choose the time for the procedure in the morning or evening, when the sun is not yet very hot on the foliage.

The mechanism of action of the drug

The use of Zircon solution stimulates the work of natural phytohormones responsible for generative processes. Such physiological and bioactive substances are:

auxins, which are involved in the growth process and are responsible for the developing parts of fruits, shoots, leaves, buds, etc.;
gibberellins stimulate the vegetative development of seedlings, seed germination, growth of stems in length, the transition to flowering;
cytokinins coordinate the multiplication of plant cells, prevent leaf aging, and affect the branching of the root system.

Growth regulator preparation Zircon for plants can be used throughout their development - from the preparatory stages of active growth and flowering, including the periods of fruit formation and ripening of the crop.

Spectrum of action

This fertilizer is recommended to be used at all stages of the growing process. Zircon is great for plants:

seeds, its effect provokes the penetration of liquid through the hard shell, as a result, healthy and strong shoots are obtained, which are subsequently used for planting in the ground;
Fertilized cuttings develop a strong root system, which is very important for root formation. Zircon has a positive effect on the formation of roots in cuttings of sakura, almond, lilac, barberry, conic, thuja, cypress, currant.As you know, a cutting is a segment of the shoot of any plant, that is, for its further development, roots must form;
a positive effect on the development of flower ovaries, that is, the number of flowers on plants treated with a biostimulant increases several times.

Important! Zircon has a positive effect only in cases of decent plant care. That is, if flowers or vegetables grow unkempt, then zircon will not solve all problems.

Fertilization is beneficial at all stages of the growing season, but only with systematic watering and other plant care measures.

Storage of the substance

It is not necessary to prepare the solution for more than 1 use.... When it stands for more than 24 hours, it loses all its useful qualities and can burn the plant. In order for the drug to be suitable for 48 hours, citric acid must be added to it in a proportion of 1 gram of acid per 5 liters of solution.

The undiluted product is stored out of the reach of children, as well as away from open flames and food. The optimal conditions are considered to be a dark room with a humidity level of up to 60% and a temperature regime of 15-20 degrees. It must be tightly closed with a lid. The shelf life from the date of production is 3 years.

How to use and the effect of "Zircon"

To use "Zircon", a working solution is prepared, which is used for completely different purposes, for example, for soaking green or lignified cuttings in it in order to stimulate rhizogenesis, for processing or watering plants at the root.

In "Zircon" you can soak the seeds, which speeds up their germination and makes the plants stronger, they treat the seedlings, especially before transplanting them into open ground, they spray the seedlings after planting, a week later, to increase immunity, they are used during the flowering period to enhance pollination and during the formation of the ovary to reduce its fall.

"Zircon", as a product dissolved in water and filled into knapsack sprayers, can be used to prevent the appearance of various fungal infections when treating plants with it at the initial stages of growth and development.

It is proved that "Zircon" contributes to a faster period of entry of pome tree crops into the season of fruiting, thanks to it the harvest ripens several days faster and is stored 10-20% longer than the prescribed period.

It is appropriate to apply "Zircon" during the period of stress caused by heat, drought, excess moisture, various epiphytoties, inept pruning, root trauma during transplantation and in other similar cases.

Useful properties of the substance for plants

A biostimulant based on hydroxycinnamic acids has a complex effect on cultures of various categories:

stimulates the defenses;
activates the course of processes at the cellular level;
reduces the negative effects of free radicals;
stimulates the germination of seeds, bulbs, tubers;
supports plants after a period of stress: temperature drops, dry periods, transplanting, picking seedlings;
effective root former is useful for sprouting roots during vegetative propagation (cuttings, layering);
accelerates the formation of buds;
enhances the effect of mineral fertilizers and organic substances;
stimulates immunity during the treatment of fungal infections and other diseases in plants;
normalizes the rate of metabolic processes;
positively affects the general condition of plants;
enhances fruiting;
is an economical form of feeding: even a small concentration of the agent gives a pronounced effect.

Effect on plants and soil

Biostimulant and immunomodulator Zircon has several beneficial properties:

antioxidant;
antimicrobial, antimycotic and antiviral agent;
growth stimulant;
protects against stress;
reduces the level of toxins in the soil and cells of affected plants;
helps in the fight against pathogenic flora;
positively affects the level of fruiting;
stimulates budding, prolongs flowering;
immunity activator.

Benefits of Zircon:

safe and non-toxic;
does not contain harmful components;
easy to prepare working solution;
there is no need for preliminary dilution with the use of alcohol, as for the Heteroauxin preparation;
suitable for most crops;
pronounced effect;
complex impact;
fast penetration into plant cells;
used for soaking tubers, cuttings, bulbs, seeds, watering, spraying green mass;
reasonable cost;
availability of funds: biostimulant Zircon is always on sale.

Benefits of using the tool

Experienced gardeners and indoor plant lovers often use Zircon as a stimulant (Figure 3).

The popularity of the drug is due to its many benefits:

It is able to normalize metabolic processes in plant tissues, which are disturbed by temperature extremes, lack of moisture, light and other unfavorable environmental factors.
After processing the planting material, the rooting period of seedlings or seedlings is significantly reduced. This property is especially important if the plants are cultivated in regions with cold climates and short summers.
Regular spraying improves the formation of a strong root system, increases the number of ovaries and fruits.
The drug promotes the removal of pesticides and heavy metals from plant tissues. Accordingly, the resulting harvest will be more environmentally friendly and absolutely safe for health.

Figure 3. One of the advantages of the drug is its versatility
In addition, the treatment with Zircon will help save on fungicides and other chemical protection agents, since plants treated with this agent are much less exposed to pathogenic microorganisms.

The drug is extremely economical and convenient to use: the positive effect of its use will be noticeable even when using a solution of a minimum concentration.