Can indoor flowers be watered with hydrogen peroxide?

Every indoor plant lover wants to see their pets healthy, lush and blooming. To achieve such a result, proper and constant care is necessary, which includes: timely watering, removal of dead leaves, transplantation and fertilization.

Now there are many chemicals for feeding flowers, their popularity is growing due to their ease of use.

Many growers forget about natural and natural methods, and one of them is hydrogen peroxide - a natural fertilizer for indoor flora.

What are top dressing for in general

Everyone who has indoor plants knows that sooner or later there comes a period when the “pets” stop blooming and growing. Fading into development is not yet the worst thing, because it happens that the flower begins to die.

If the pet suddenly stops blooming, this may be a sign of a disease.

Of course, first of all you need check the plant for parasites and diseases, and pay attention to the correct watering. If all of the above does not apply to the fading of flowering, then it becomes clear that the flower lacks nutrients.

Probable harm and precautions

Not all growers are positive about the use of pharmacy products (aspirin, coal, hydrogen peroxide) in the care of indoor flowers, but multiple reviews confirm the effectiveness of the drugs. The benefits for plants turn into harm when the concentration or frequency of use of the formulations is violated. The concentrated solution can burn the roots or cause stains on the leaves.

Next is a video, from which you can learn more useful information and benefits and about the secrets of using hydrogen peroxide for indoor plants:

Surprisingly, I learned about such a property of peroxide as a plant healer when a child began to water flowers with peroxide for the sake of interest, adding it to the water and sprinkling it over the leaves. It turned out that if you do not abuse it, the flower becomes brighter, the leaves are stronger, and no diseases stick.

Many growers know that sometimes there comes a period when the plants stop blooming and their growth slows down. Most often, these signs indicate improper care, the presence of diseases or insect pests. Hydrogen peroxide is one of the proven ways to feed flowers that can solve several problems at the same time.

Hydrogen peroxide for indoor flowers

There are many ways to feed pets, this is egg water, and honey, and sugar, and of course hydrogen peroxide.

Is it possible to water flowers with peroxide

Not just possible, but even necessary. After all, it is peroxide that will help solve problems such as:

• Getting rid of harmful bacteria that prevent them from developing and blooming;
• Significantly accelerate flowering;
• Prevent pet root rot.

The main thing is, before starting the fertilization process, one must not forget to get rid of withered and dry leaves, rotten flowers and loosen the ground.

If the plant is damaged, peroxide is an excellent disinfectant.

The remedy helps with injuries to both people and plants

Use as fertilizer

Fertilizing with hydrogen peroxide, there is no need to add other fertilizing.Peroxide will give the flowers all the necessary trace elements, and when you add another product, oversaturation can occur, and you can simply spoil the flower.

For watering flowers

What do we usually water flowers with? By water from the tap that has settled... But all flowers, and even indoor ones, are very fond of rainwater. Rainwater is essential for any plant to grow properly.

But how to achieve this effect at home? This is where perexid will help. This requires 2 tablespoons of hydrogen peroxide and 1 liter of water. Stir well and you can start a course of feeding your plants with peroxide.

You need to water with such a solution once every five days (in no case more often!), And you can also spray the plants with it.

For daily watering, add just a few drops of peroxide to one liter of water.

Growth stimulator and plant protection

Peroxide is found in rainwater, and this natural phenomenon is called natural purification. After the rain, plants and trees begin to bloom better, grow more actively and somehow miraculously recover.

But there is no miracle here, Mother Nature knows exactly what her children need. After all, whole fields of wild flowers grow without industrial fertilizers, and they bloom better than the exact same ones in captivity, and with a thousand special dressings. Perexid copes with this task perfectly.

The use of peroxide in floriculture

Peroxide helps not only for indoor plants, but in general it is quite extensively used in floriculture.

Seedlings can also be treated with this tool.

• Seeds germinate well if they are soaked in hydrogen peroxide solution. As in the case of indoor flowers, peroxide perfectly disinfects seeds and allows them to grow faster and guarantees excellent flowering.

Usually seeds soaked for twelve hours, and if it comes to those plants that have a natural difficulty in germination, then for 24 hours;

• Peroxide treatment is excellent for treating seedlings - both for watering and for irrigation;
• Well, what we have already said above - peroxide will return to life a plant that seems to have already died, this rule applies to the garden and indoor "pets";
• Peroxide together with a little alcohol is fine will help free from insects;
• Peroxide solution will help protect against parasites.

When and how to make dressings for indoor flowers

First you need to understand the general rules of how and when to make flower food.

When to feed plants

If your plant is elongated, the stems become thin, if growth has stopped or slowed down, the leaves turn pale, light spots appear on them, the plant refuses to bloom, then most likely it lacks nutrition.

But it is not necessary to bring the flowers to such a terrible state; they need to be fed regularly.

Already from March, when the sun begins to peep into the windows more and more often and the flowers start to grow, you should start feeding them once every two weeks. And continue to feed in this mode until October.

Top dressing is applied both during growth and during flowering.

From October to February, plants usually have a dormant period, they, like bears, plunge into hibernation and do not need additional nutrition. The exception is those that bloom in winter. Winter flowering can be fed occasionally, but not more often than once a month.

Although experts - flower growers still do not recommend doing this in the dark season from November to December.

How to apply top dressing correctly

Important! In no case should top dressing be applied to dry soil, as this can damage the plant and burn its roots.

First, we water the flowers, and after they have quenched their thirst (the day after watering) we feed them.

Flower dressing is applied both dry and diluted in water.

Dry means are scattered over the surface of the earth, then the soil must be loosened and lightly watered with water.

Top dressing, diluted with water, water the plant around the entire bush, preferably closer to the edge of the pot. It is not necessary to fill in, very little fertilization is required. Water must be used only previously settled, and not from the tap, at room temperature.

Sometimes top dressing is used in the form of spraying.

Unusual plant nutrition products

An excellent watering agent is water with sugar... Half a teaspoon for 0.5 liters. Or you can simply sprinkle a pinch of sugar on the ground before watering.

This method is also amazing because it is suitable for absolutely all plants, especially succulents and ficuses.

Aloe juice just like sugar, it is suitable for all homemade varieties. For one teaspoon one and a half liters of water.

Aspirin will help to improve immunity well with the help of sprays, and for this, dissolve an aspirin tablet in one liter of water.

One of the most common feeding methods is banana peel... It is known for its rich content of vitamins and microelements, and it is used for transplanting (chop the peel and put it on the drain).

Egg water also a fairly well-known method of fertilization, as well as the simplest. Therefore, do not empty the water after boiling the eggs, but cool it down and water your plants.

Vitamin B12 perfect for feeding violets. To do this, one ampoule of the vitamin must be dissolved in a liter of water. Watering with such a solution should be no more than once every two weeks.

Citrus peels generally indispensable in the household - pour 1-2 fruit crusts with a liter of water and leave for 24 hours, and you can water your flowers with such a nutritious and aromatic remedy.

Mushroom infusion will be able to make plants healthy not only from the inside, but also externally. Mushrooms (of course, those that a person can eat) chop and soak in one liter of water and leave for a day.

Then the water must be drained and the mushrooms must be poured with water again and left for another day. Water no more than once every 5 days.

We separately considered the topic of fertilizing in an article on 26 types of fertilizers for indoor plants.

Peroxide is cheap and incredibly effective in helping your plants get the micronutrients and nutrients they need for flowering. You do not need to spend a lot of money on fertilizing that contains chemistry. Do not forget that what all the world's agricultural destinations are using is what they really are. necessary and useful tools.

How to use

It is important to take into account the nuances of each operation, adhere to the rules for preparing the solution, and not violate the concentration. Improper use of peroxide when caring for indoor plants can be harmful.

Watering

The best option is to use rainwater to regularly moisten the substrate, but many have neither the time nor the desire to collect the irrigation agent. Moreover, in many regions the ecological situation is worse than normal, and rains are often not beneficial, but harmful to plants due to dangerous salts and chemicals dissolved in the air.

It is not difficult to prepare water at home, similar in composition to rainwater:

• dissolve 2 drops of peroxide in 1 liter of tap water, water as usual.
• a weak agent is used regularly, if it is necessary to disinfect the soil, then a stronger composition is used: for 1 liter of liquid - take 1-2 cm.

Top dressing

For a positive effect on the plant, a medium strength hydrogen peroxide solution is sufficient. Mix 1 tbsp. l. means and 1 liter of lukewarm water. A small amount of funds is enough for one time. The frequency of procedures is 1 time in 5 days, not more often.

Many experienced flower growers use not only peroxide to feed plants, but also other home remedies. Banana peel is a cheap, safe plant fertilizer.It is important to know the rules for using a natural product. Banana skins are used not only for feeding, but also for repelling pests.

Spraying

For irrigation of leaves and soil, a solution of the same concentration is used as for fertilizing the substrate (according to the recipe in the previous section). Spraying gives a good result for disinfecting green mass and stem and soil with the development of bacterial diseases and putrefactive lesions of indoor flowers. First, wipe the affected leaves and stem, remove the infected leaf plates, remove the top layer of soil about 1 cm thick, then use a disinfectant solution.

Spraying is also carried out at a certain interval - every four to five days. Violation of the rule, frequent use of a composition based on hydrogen peroxide can harm flowers.

Spraying has several features:

• first prepare a solution, take water at room temperature;
• the first stage is the processing of shoots and trunk;
• then spray the agent on the lower part of the leaves;
• the final stage is spraying the leaf plates from above.

Application for roots

The hydrogen peroxide added to the tap liquid brings its composition slightly closer to rainwater. With regular watering, the growth of indoor flowers improves.

For daily watering, 1 drop of a pharmacy product is added to 1 liter of water at room temperature. The addition of liquid is carried out according to the needs of various plants in soil moisture.

Seed treatment before sowing

Disinfection of planting material is an important step, due to which the risk of bacterial and fungal infections is reduced. A popular method is to soak the seeds in a potassium permanganate solution.

There is a second, no less effective method: the planting material is kept in a container with hydrogen peroxide for 12 hours. For plants with poor seed germination, the treatment period is increased to 1 day. A solution based on hydrogen peroxide is a specific growth stimulator for indoor flowers, safe and effective.

Can flowers be watered?

Hydrogen peroxide has a positive effect on many living organisms, including flowers. In nature, plants receive water after rain and melting snow. It is this chemical composition of water that is ideal for indoor flowers, and it is possible to obtain it thanks to hydrogen peroxide. With such a diluted agent, it is allowed to irrigate young seedlings and indoor plants, disinfect seeds before planting in the ground and spray seedlings.

Experienced flower growers claim that already an hour after the peroxide hits the ground, you can see a positive result. The plant begins to grow much faster, the green mass increases and, subsequently, fruiting increases. In addition, hydrogen peroxide is recommended for treating plants during their growth, since it effectively fights various types of diseases.

Fight against diseases in aquarium plants

There is a lot of debate about what the medicinal product gives to the plants in the aquarium and whether it is safe for fish. Researchers who have tried several methods in a living, functioning aquarium note the following:

• the treatment is effective in treating oxygen deficiency in fish;
• a weekly course allows you to get rid of ineradicable green algae, including a black beard;
• nitrogen released during the decomposition of organic matter can be neutralized, preventing fish diseases.

To get a positive effect and not harm the inhabitants, peroxide is used according to the following scheme:

• the minimum dosage agent (3%) is drawn into a syringe in a volume of 2.5 ml;
• the contents of the syringe are poured into the clean, warm water prepared for the aquarium and stirred;
• the agent is added to the aquarium when the water is changed, for this it is poured with a thin stream onto the working filter for the most even distribution;
• after 60-90 minutes, green algae (plaque on the walls and aquarium plants) begin to die, at this time the soil must be siphoned out, the required amount of clean water must be added to the aquarium.

Recommendation. Unfortunately, it takes a week to remove all the green plaque on the glass. Daily peroxide treatments will be required. In order to prevent a repetition of such a negative phenomenon, it is recommended to strengthen the lighting, normalize aeration and water filtration, and do not miss the time of its replacement.

Benefits for plants

The chemical formula of the hydrogen peroxide molecule resembles water, so plants react to it quite normally. Peroxide is notable for its instability, and upon contact with the treated surface, an oxygen atom is released. It disrupts the normal functioning of microbes and pathogens.

Another main function in the release of an atom is considered to be filling the soil with oxygen. In addition, thanks to peroxide, it is possible to purify the water for irrigation. By adding a few drops of such a product to 30 ml of water, active displacement of chlorine begins, and pesticides are removed due to hydrogen peroxide.

Many experts recommend watering indoor plants with hydrogen peroxide for the following reasons:

• allows you to get rid of harmful bacteria that hinder the development of the plant and inhibit its flowering;
• inhibits the process of decay of the roots of indoor flowers;
• accelerates flowering.

In the event that the plant is damaged, then hydrogen peroxide is considered an ideal disinfectant.

Common questions

Hydrogen peroxide is widely used in floriculture due to its ability to destroy microorganisms and the presence of an additional oxygen atom. It is used as watering, fertilizing, pest control and seed treatment.

Hydroponic growers and gardeners sometimes use hydrogen peroxide in plant care. Spontaneous decomposition of the preparation releases oxygen in the zone of the plant root system, which promotes better root development and protects them from decay. Many farmers have obtained the best yields by spraying with dilute H2O2 solution. Hydrogen peroxide for plants, which is mainly used in the medical field, can be used for disinfection, strengthening, fertilization and disease control.

The tool copes well with various bacteria, is suitable for treating seeds, seedlings, adult plants. In the correct dosage, peroxide can be introduced into the aquarium environment without removing the inhabitants to remove tenacious blue-green algae and stop the decay process.

How to prepare the solution?

At home, indoor plants are most often watered with tap water. However, they still prefer rainwater because it contains peroxide. For watering indoor flowers at home, a solution is usually prepared according to the following scheme:

• in a pharmacy you need to purchase a 3% hydrogen peroxide solution;
• you need to dilute 20 ml of such a product in 1 liter of water;
• the solution must be mixed well and used for watering the plants.

It is recommended to carry out the procedure once every 4-5 days, and it is allowed to use such a solution for spraying flowers. You can make a mixture of ½ cup of peroxide and the same amount of sugar and pour two liters of water over it.

Florists use different dosages of hydrogen peroxide, depending on the goal:

• if necessary, water the plants daily, dissolve a few drops of the product in 1 liter of water;
• for healing activities for the soil, dilute 3 ml of peroxide in a liter of water.
• if it is necessary to disinfect seeds before planting in the soil, it is not necessary to dilute the peroxide;
• when preparing the soil before planting plants, you need to dissolve 1 bottle of the product in 5 liters of water.

Hydrogen peroxide is effective in combating various plant diseases and helps to give sluggish seedlings a healthy appearance. It is possible to cope with late blight with the help of a solution prepared from a bucket of water, a few tablespoons of hydrogen peroxide and 40 drops of iodine.

Additional benefits

It is worth remembering that this fertilization option eliminates the need for additional fertilizing, since the prepared composition contains all the necessary elements.

If you add 40 drops of iodine to the described solution, then you can protect the flowers from a number of pests - scale insects, midges, mealybugs and spider mites.

In the event of a large-scale lesion, it is recommended to add a little medical alcohol to the last version of the composition. In a weaker concentration, such a mixture is good for the prevention and disinfection of healthy plants.

In this video, there are some more helpful tips for using peroxide:

A big plus of hydrogen peroxide when processing indoor and garden plants is its availability and low cost. And most importantly, no aggressive chemicals!

For the care of ornamental plants in the home, various agents are used, including hydrogen peroxide. The optimal concentration of the solution based on the pharmaceutical product and the use of the undiluted preparation, when used correctly, will improve the condition of the plants.

Hydrogen peroxide for indoor flowers is a cheap and effective agent for fertilizing, spraying, disinfecting leaves and soil, and treating seeds. Florists will need material on the nuances of using a pharmacy product.

Top dressing and fertilization

Thanks to hydrogen peroxide, it is possible to keep the roots of indoor flowers and seedlings healthy and attractive.

Watering

It is possible to achieve a positive result due to additional aeration, which helps the plant to quickly assimilate macro and microelements. When hydrogen peroxide enters the ground, oxygen is released, which absorbs dead roots and thereby prevents the multiplication of various pathogens. It is recommended to simply stir 10 ml of peroxide in 1 liter of water and water the houseplants with this nutrient mixture once a week.

When peroxide is applied to the soil as fertilizer, there is no need to resort to other dressings. The fact is that such a product contains all the necessary trace elements that are needed for the normal growth of the plant and its flowering. When using other types of fertilizers, soil oversaturation may occur, or the flower will simply be spoiled.

Hydrogen peroxide also helps to cope with plant diseases such as root rot and black leg. Usually rot on the roots appears during the day when the plant is flooded with water and the roots are in stagnant water with insufficient oxygen. In this case, it is recommended to irrigate such plants with a solution prepared from phosphorus fertilizer and 3% hydrogen peroxide. It is necessary to add 20 ml of H2O2 to the fertilizer solution and process this plant mixture twice a week.

Spraying

In addition to watering, it is allowed to spray plants. It is recommended to perform this procedure several times a week, while not forgetting to lift the leaves of the flower. It is necessary to carry out spraying from the outside of the plant, be sure to pay attention to the stems. The constant implementation of such a procedure helps indoor flowers to maintain their attractive appearance for a long time. Gradually, the leaves turn bright green, and the weak shoots take on new life. Hydrogen peroxide is considered to be effective against fungal diseases such as blackleg, mold and root rot.

At home, you can prepare a prophylactic agent with the addition of hydrogen peroxide, which must be sprayed with flowers every day. For such a solution, the following components are used:

• 900 ml of water;
• a few drops of dishwashing liquid;
• 20 ml of medical alcohol;
• ¼ glass of 3% hydrogen peroxide.

The mixture for spraying plants must be prepared before use by mixing all the components together. It is recommended to irrigate the stems and leaves of plants with such a remedy with the addition of hydrogen peroxide, which helps to protect them from various pests.

Methods for using peroxide

When caring for indoor flowers, it is recommended to use a very low concentration solution, since using the drug in its pure form can burn the treated surface.

If feeding of decorative deciduous plants is carried out, then exclusively root or foliar. In addition, it is recommended to process flower pots, both when planting and when transplanting, as well as gardening tools and hands.

Watering

The need for watering with this tool is due to the ability to achieve additional aeration. This contributes to the rapid assimilation of useful components contained in the planting material by domestic plants.

Peroxide, getting into the soil, releases oxygen, which absorbs particles of the dead root system, which prevents the reproduction of parasitic insects. To do this, it is enough to mix 10 ml of the product in 1 liter of cold water and water the flowers in the summer - 1-2 times a week, in the winter - once every 2 weeks.

The bactericidal solution helps in the fight against pathologies such as black leg, late blight and root rot. Most often, these diseases occur when the root system is in water with a minimum oxygen content. To do this, it is recommended to treat the flowers with a solution of their 3% peroxide and phosphorus fertilization at the rate of 20 ml of the substance per standard fertilizer package. Apply twice a week.

However, to achieve a positive result, you should adhere to certain rules:

• before watering the plant, clean the surface of the soil from debris (fallen leaves), which promotes the process of decay and, as a result, the reproduction of pathogenic microorganisms;
• water in such a way that the soil is completely saturated with the prepared solution. To avoid decay of the rhizome, excess moisture, the remaining irrigation field must be drained;
• it is good to loosen the upper layer of the substrate - this will provide good oxygen access to the rhizome;
• watering once a week so as not to harm the plant.

It is worth knowing that for certain types of plants (orchids, saintpaulias), bottom watering is used. To treat the nutritional composition of orchids, violets and roses, the following composition must be prepared:

• 2 tbsp. l. peroxide;
• 1 liter of water;
• iodine - 30 drops.

Thorough processing (from all sides of the plant) is carried out once a week.

How to feed a plant?

The use of such feeding eliminates the wilting of the plant and promotes the activation of growth. In addition, irrigation in this way significantly improves the composition of the substrate, which over time becomes enriched with trace elements and nutrients.

According to experienced flower growers, after a few dressings, you can see the following results:

• the shade of the foliage becomes darker;
• new buds are formed (in flowering species);
• the branches become more elastic.

Spraying

In addition to watering, almost all types of plants can be sprayed with this composition. It is more advisable to hold the event 2-3 times a week, lifting the leaves up. This must be done from the outside and inside in order to carefully process each sheet.This procedure helps thicken the foliage and maintains its turgor: young shoots grow faster, weak ones become stronger.

Spraying with peroxide is effective for some lesions: mold, black leg, late blight and root rot, and also serves as the prevention of pests.

The following nutritional composition is recommended:

• 1 liter of water;
• 30 ml of 3% peroxide;
• a few drops of any liquid dishwashing liquid;
• 20 ml of alcohol (90%).

When spraying, it is necessary to treat the entire plant: the back and outer sides of the leaves, buds, flowers, rhizome (if the aerial root system).

How to water the roots of a flower?

Watering the root system with this tool is an alternative to many organic fertilizers. A few drops of the substance can replace an expensive ready-made feeding. As with irrigation, when using a composition with peroxide, it is not recommended to use other fertilizers for feeding the root system.

As a rule, flower growers use only settled tap, rain or melt water. If for any reason such water is not available, it can be replaced with a nutrient solution: dissolve a few drops of a 3% solution in a liter of water.

Such watering is necessary in order to:

• improve the nutrition of the root system;
• disinfect the substrate;
• prevent root decay.

Plants should be watered at the root once every two weeks; in order to avoid oversaturation of the soil with microelements, it is not recommended to do this more often.

Seed treatment

Before planting seeds, they must be disinfected with special compounds. As a bactericidal agent, a similar composition is used as for the spraying procedure.

It includes:

• 30 ml of peroxide;
• litere of water;
• any liquid dishwashing liquid (a few drops);
• 20 ml of 90% alcohol.

The seeds of almost all plants will germinate much faster if they are soaked in peroxide for several hours.

To prepare the composition, dissolve 30 drops of the substance in 250 ml of tap water. Bactericidal treatment of seeds will help soften their shell, which will contribute to faster growth, as well as destroy pathogenic microorganisms.

After picking the seedlings, it is necessary to treat them with a fresh solution daily. This will help to saturate the young leaves with oxygen and stimulate their growth.

In rare cases, the nutrient solution will promote the formation of white mildew spots on the surface of the substrate. This usually happens when the soil is acquired. In this case, it is recommended to treat young seedlings by spraying, completely eliminating watering until the spots disappear completely.

Seed treatment is a powerful prevention against the invasion of certain pests, these include:

Important! All disinfectants are prepared immediately before use. Top dressing prepared in advance is not as effective.

For seeds and seedlings

If seed dressing is required, hydrogen peroxide can be replaced with such a traditional agent as potassium permanganate. To disinfect the seeds, it is necessary to soak them for half an hour in a 10% solution, then rinse well with water and dry. If you are confident that there are no pathogens in the plants, it is allowed to use hydrogen peroxide as a growth stimulant. In this case, the seeds should be soaked in 0.4% hydrogen peroxide solution for 12 hours. It is recommended to soak difficult parsley, beet or carrot seeds in the solution for two days.

The seeds will germinate much faster and the seedlings will have strong roots if left in a 3% peroxide solution for a while. To prepare such a solution, it is necessary to dissolve 30 drops of 3% peroxide in a glass of water. Such a tool helps to quickly soften the seed coat and destroy the pathogens that live on their surface.

After picking the seedlings, it is recommended to spray them daily with a solution of hydrogen peroxide. Such a remedy saturates the leaves with additional oxygen, and the seedlings grow much better. To prepare the mixture, you must dissolve a vial of 3% hydrogen peroxide in two liters of water. With such a tool, it is necessary to spray the leaves of the seedlings or water it at the root. The solution disinfects the soil and helps to protect the seedlings from various pests.

In some cases, when using a solution of hydrogen peroxide, white spots may form on the surface of the soil, which resemble mold. This is most often observed when using land purchased from a store, and in such a situation it is better to spray young seedlings without watering.

Solution preparation and dosage calculation

The main components of the solution are peroxide purchased from a pharmacy and running water. Some recipes require added sugar or iodine. To prepare a standard solution, use a liter of water and 10-15 drops of the product.

Experts note that the dosage of the components may vary depending on the purpose of use. So, for daily watering, only a few drops of the substance are diluted in a liter of water. Regular watering with such a mixture will bring quick results and soon the flower will begin to actively grow, and its appearance will change for the better.

If it is necessary to cure the plant, then the dosage is increased to 3 drops of peroxide per liter of water.

It is these solutions that are used to treat decay of the root system, and give a healthy look to withered young plants.

Often seeds are disinfected with this substance before planting, for which it is not diluted, but a concentrate is used. Also, peroxide can be used to treat the substrate itself when planting a plant. For this purpose, a whole bottle of peroxide is poured into 5 liters of water.

Peroxide is highly effective in the treatment of plant diseases. For medicinal purposes, a solution is prepared from 40 drops of iodine, 10 liters of water and 100 ml of peroxide. Experts recommend using such a medicine when late blight is detected.

Benefits of peroxide for plants

This solution is used to eliminate various problems, including:

• elimination of bacteria;
• prevention of root decay;
• acceleration of flower growth.

Before watering, you should get rid of damaged leaves and parts of the plant, and also loosen the ground a little so that the rhizome gains access to air.

If the plant has wounds, the peroxide is used for disinfection. In order for the seeds to better take root in the soil and begin active growth, it is preliminarily recommended to soak them in a peroxide solution. If you need to root the cuttings, they are placed in water with the preparation. This does not allow the processes to rot, and also contributes to the rapid development of the root system.

Benefit and harm

The drug has many positive qualities when used in indoor floriculture and gardening, while not having a negative effect on humans and pets.

Useful properties of peroxide:

• harmful effects on fungi, viruses and bacteria;
• growth stimulation;
• acceleration of metabolic processes;
• providing an indoor flower with the necessary conditions for flowering;
• improving soil structure and quality of tap water;
• assistance in plant restoration;
• prevention and control of diseases and pests.

As in the case of other drugs, the negative effects of hydrogen peroxide are manifested with excessive use. The recommended dosage and frequency of treatments must be observed. Otherwise, plants may have a decrease in their own immunity. In most cases, this feature is manifested in young specimens.

Peroxide for indoor plants, application

In everyday life, indoor "favorites" are most often watered with plain tap water.But they always preferred rain liquid more, as it contains peroxide. To water with hydrogen peroxide for indoor plants, you must prepare the following remedy:

• purchase a 3% solution;
• mix 2 tablespoons of the product and 1 liter of water;
• stir thoroughly.

Plants are watered with this solution once every 5 days. Spraying of plants is also done with the same means.

For spraying, you can prepare a slightly different mixture:

• mix ½ cup of peroxide with the same amount of sugar;
• pour the mixture with two liters of water.

In addition, for various purposes, flower growers use the following dosage of the solution:

• if it is necessary to water the plants daily, then add a couple of drops of the product per 1 liter of water;
• in the case of recreational activities for the soil, dilute with 3 ml of solution in 1 liter of water;
• to disinfect raw materials for planting, it is not recommended to dilute peroxide;
• when preparing water for planting, you need to dilute 5 liters of water with 1 ml of peroxide.

Peroxide is a cheap and effective remedy for taking care of indoor plants effortlessly. The main thing is to observe the recommended doses when using, and a positive result will be visible in a couple of days.

Peroxide application

All lovers know that indoor plants are very fond of when they watered with rainwater, it is in it that hydrogen peroxide is contained.

When a few drops of peroxide are added to tap water, chlorine is displaced, and when in contact with the ground, oxygen atoms are released, which saturates the soil with the necessary element.

In order to create a solution close to natural at home, it is necessary

• buy 3% hydrogen peroxide at the pharmacy;
• mix 1 liter of water, 2 tbsp. l. purchased product and stir thoroughly.

This composition use once a week... If more frequent hydration is required, you need to reduce the amount of peroxide to 10-15 drops. Before watering, be sure to clear the soil of fallen leaves, other debris and loosen it up.

This procedure will help your plants bounce back and please with flowering. The product with the addition of H2O2 will also cope well in cases of root rot due to overflow.

For spraying indoor flowers, use the same ratio., you can add a little sugar.

If you regularly process plants in this way, they will not fail to please you with good, active growth and a healthy look.

Seed dressing before planting

Good seed is the key to a generous harvest. That is why it is recommended to prepare the seeds before planting in the ground. One of the preparation stages will be getting rid of pathogenic bacteria and microorganisms. A proven and reliable method of disinfection - seed treatment with hydrogen peroxide before sowing... However, when using any disinfectant, the question of its safety is raised. Therefore, further on how this tool is used is applicable to plants from a scientific point of view.

The hydrogen peroxide formula differs from the water formula in the presence of an oxygen atom. In a molecule, oxygen bonds are unstable, as a result of which it is unstable, loses an oxygen atom and, accordingly, breaks down into absolutely safe oxygen and water. Oxygen acts as an oxidizing agent, destroying the cells of microorganisms, as a result of which most harmful spores and pathogenic microbes die. Plant immunity is increased. There are a number of ways to treat seeds with hydrogen peroxide:

1. Place the seeds in a 10% solution. The ratio of seeds to water should be approximately 1: 1. Most types of seeds are recommended to stand in this way for 12 hours. Exceptions are tomato, eggplant, beetroot, which should be soaked for about 24 hours.
2. Place seeds in a 10% solution, and then rinse in running water.
3. Soak seeds in 0.4% H2O2 for 12 hours.
4. Heat the 3% composition to 35-40 degrees, add seeds to it for 5-10 minutes, stirring constantly. Then dry.
5. Spray seeds from a spray bottle with a 30% solution and allow to dry.

Experiments have shown that after dressing the seeds are more resistant to adverse weather conditions.

Chemical properties and composition of peroxide

Hydrogen peroxide is widely used in medicine. The active ingredient in this drug is hydrogen peroxide. The main difference between peroxide and ordinary water is the presence of an extra oxygen atom, which quickly detaches. This drug is in every medicine cabinet due to the fact that it has powerful antibacterial properties and belongs to the group of oxidants. So, it is used in first aid to treat wounds, cuts and stop bleeding.

The bactericidal properties of peroxide

By releasing free oxygen, the substance helps to destroy microbes on the surface of the skin and to cleanse damaged and dead particles. Foam formation accelerates the process of blocking damaged blood vessels and stopping bleeding. However, the medicine has only a temporary effect and does not completely sterilize the wound surface.

Growth stimulator for seeds

Methods of soaking seeds in hydrogen peroxide before planting, in addition to disinfecting, also have a stimulating effect. The seeds contain inhibitors that prevent them from germinating. In nature, they are naturally destroyed during the oxidation process. When H2O2 works, its molecule breaks down and active oxygen is released, which is the active oxidant. Therefore, it rather destroys the inhibitor, which increases the percentage of germination and promotes more active germination. Scientists have proven that the use of this agent as a stimulant is more effective than the use of the commercial drug "Epin-extra" or potassium permanganate.

Experiments have shown that the germination rate of tomatoes after such treatment can reach 90%, corn - 95%. After soaking cabbage seeds, seedlings appear earlier than usual from 2 to 7 days.

Application of fertilizer solution

Feeding plants with peroxide at home is carried out provided that they have recently been transplanted into nutrient soil or the working solution contains additional components. Wherein it is not recommended to use synthetic mixtures in parallel with peroxide. It is better to add granulated sugar, aloe juice or natural honey to the watering liquid.

You can also use iodine. As a fertilizer, the resulting product is used when signs of a deficiency of this element appear. Along with peroxide, it is permissible to add an infusion of rotted humus aged for several days in order to feed the plant with all the necessary nutrients at once.

The use of hydrogen peroxide is widespread in the cultivation of various crops at home. You can buy the drug at any pharmacy at a symbolic price. The beneficial properties of the product are manifested at all stages of plant growth and development.

For the development of the root system of seedlings

Before planting, it is recommended to treat the seedlings with hydrogen peroxide. Active oxygen kills bacteria and also promotes growth by oxygenating tissues. You can either spray the seedlings or place them in a solution. It reanimates dead roots and is also best at preventing root rot. Take 3 ml of the drug per liter of water and place the seedlings there for the required time. If you use the method as a growth stimulator, a day is enough. If the plant is sick, the solution should be used until complete recovery, renewing it. Due to the saturation of plant tissues with oxygen, their immunity increases, cuttings take root faster.

It is noticed that after the treatment of tomato seedlings with peroxide, there are much fewer cracks on ripe fruits.

Spraying

Peroxide is used in the form of an aqueous solution for pollination, fertilization, and treatment of plants. The usual composition of a liter of water and a spoonful of peroxide is poured into a spray bottle and used as follows:

• for spraying conifers and shrubs in order to improve pollination and increase the ability to reproduce;
• for the treatment of garden crops from late blight (a spoonful of alcohol 96% is added to the basic solution);
• for spraying plants and indoor flowers with the addition of phosphate fertilizer for foliar feeding.

Watering and spraying plants

Hydrogen peroxide is widely used for indoor plants. On its basis, you can prepare solutions for watering and spraying. The universal recipe is 20 ml 3% H2O2 per liter of water. Adding it to the soil contributes to its greater aeration, since an active oxygen ion is released, combines with another atom and forms a stable oxygen molecule. Plants receive more of it than before the procedure.

Acting as an oxidizing agent, it kills bacteria, mold and mildew that form in the soil. There are recommendations on how to water flowers with hydrogen peroxide, namely 2-3 times a week. Scientists have found that it is precisely after this time after the solution is introduced into the soil that it decomposes into water and oxygen. You can use a universal solution for spraying and watering garden and garden plants. When oxygen is released, it acts as a kind of baking powder - the root system and sprouts receive more of it. The seedlings take root and grow much better.

The solution can revive wilting crops. Also, a hydrogen peroxide solution is indispensable for soils that receive excess moisture. Plants receive a lot of water and little oxygen, so they simply have nothing to breathe. When a hydrogen peroxide solution is introduced into such a soil, the root system receives additional oxygen when the H2O2 molecule breaks down. Watering is advised to be carried out no more than once a week.

You can spray the sprouts with a solution, this will give the leaves more oxygen and kill pathogenic microbes. Crop growth and productivity will increase.

Onion peels are a wonderful top dressing for indoor flowers

Onion peels are useful for us not only for coloring eggs, but also a wonderful food for flowers from it!

We will need to prepare a decoction.

Put a good handful of husks in a saucepan, pour two liters of hot water into it and cook for 5 minutes over low heat.

After the broth has stood for a couple of hours, it should be filtered and used for spraying or watering flowers.

This broth is not stored for a long time, so discard the leftovers immediately. And the procedure can be repeated in a month.

Application as fertilizer

With regular watering of the soil with a solution of hydrogen peroxide, the roots of the plants are healthy, additional aeration of the soil occurs. It is enough to use a mixture of a teaspoon of H2O2 per liter of water as a fertilizer. This fertilizer is safe, as it decomposes into safe oxygen and water a few days after use. Fertilizers based on hydrogen peroxide are approved for use by the International Federation of Organic Agriculture Movement. In America, for example, 164 species have been recorded. They are used to process annual and perennial plants, seeds, are introduced into the soil, they are used to process products after harvesting. At the same time, after use, the products are allowed to be labeled as organic. This is important nowadays as healthy eating is becoming a priority.

For what and in what cases they are used

Hydrogen peroxide solution is used to spray and water many indoor flowers. Before the first use, you need to carefully study the rules for preparing the compositions, find out the proportions so that the product is not too concentrated.

Competent treatment of affected plants or the use of a pharmaceutical agent for prophylactic purposes preserves the strength and strength of flowers, and solves many problems. Many growers confirm that the positive effect of peroxide on plants and soil has been noted.

Indications for the use of formulations based on hydrogen peroxide:

• rotting roots;
• identified a bacterial infection;
• mold appears on the ground;
• the flower grows weaker.

Watering flowers with hydrogen peroxide

Hydrogen peroxide is used at the stage of seed treatment before planting. for seedlings, which allows saturate them with oxygen, strengthen and stimulate.

Soaking seeds in hydrogen peroxide:

• 25 drops of peroxide 3%;
• 250 ml of water;
• Soak for 30 minutes;
• Take out and rinse under water;

Watering flowers with hydrogen peroxide:

• 3% peroxide solution in a volume of 50 ml;
• 2 tbsp. l. alcohol;
• 900 ml of water;
• 1 tsp soap shavings;

Water or spray flowers with hydrogen peroxide solution... Helps in the treatment of fungal diseases: root rot, black leg, mold infestation... It has an aeration effect for the soil, disinfects diseased areas.

How to increase the breathability effect with peroxide:

• 3% solution of 2 tbsp. l. for 1 liter;
• Apply 2 times a week;
• Alternate with phosphorus liquid fertilizers;

Hydrogen peroxide from flower diseases at home

You can apply peroxide as a first aid on indoor flowers by adding 40 drops of iodine to a standard solution (30 ml of peroxide per 250 ml of water). Water if damaged by bacterial infections or pests.

Pests who are afraid of peroxide:

• Shield;
• Spider mite;
• Mealybug;
• Small midges;

To get rid of a large-scale lesion, add rubbing alcohol to the solution. It is also possible to carry out prophylaxis and disinfection after treating problems.

To summarize - why do we need hydrogen peroxide for flowers?

Hydrogen peroxide molecules according to the chemical formula are close to water - Н2О2, therefore, plants perceive it normally. The peroxide molecule is unstable, that is, upon contact with the treated surface, it quickly releases an oxygen atom, oxidizing and, as a result, destroying microbes, spores, and pathogens. A side release function will be to oxygenate the soil. Hydrogen peroxide can be used to purify irrigation water. How? By adding from a few drops to 30 ml to water. start the process of displacing chlorine from water. The miracle cure also copes with the removal of pesticides.

↓ Write in the comments, do you use hydrogen peroxide for watering flowers? What ingredients do you add to the watering solution? Were you pleased with the processing results?

Disease protection

If the question is - is it possible to water diseased plants with peroxide, you need to understand the causes of diseases. You can use the drug to combat certain phenomena:

• the formation of mold on the surface of the soil;
• the appearance of green algae and plaque on the pots;
• decay of roots as a result of waterlogging.

For processing, a solution is prepared, consisting of 1 liter of clean warm water and 3 tbsp. 3% peroxide. When fighting mold, an additional 1 tsp is introduced into the composition. phosphoric liquid fertilizer, it helps to strengthen the immunity of plants. If it is necessary to stop the decay processes, it is not advisable to introduce fertilizer; instead, add 1 tbsp. l. Sahara. Sick specimens should be watered at least 2 times a week until the signs of the disease disappear, but no longer than 3 weeks.

Recommendation. Green transparent pots (from orchids, spathiphyllums, ferns) are treated with an undiluted preparation. It disinfects the surface, slows down the formation of new microorganisms.

For the garden and the prevention of diseases of horticultural crops, peroxide is used as follows:

• for the prevention of late blight, seedlings are treated with a weak solution (1 tbsp. H2O2 3% per 5 liters of water);
• to disinfect garden tools and greenhouses, use an undiluted preparation, wiping moldy areas or cleaning the surface of tools.

How hydrogen peroxide works

In nature, plants are fed from rainwater, which activates their growth. It is difficult to collect enough rainwater, and in this case, an effective pharmaceutical preparation comes to the rescue.

The substance is similar in chemical composition to rainwater. The chemical formula contains an additional unstable oxygen atom, which acts as an oxidizing agent, has a disinfecting effect, destroys pathogenic microflora and bacteria in the soil and wounds on plants, and saturates cells with oxygen.

The oxidizing effect improves the quality characteristics of the water. Hydrogen peroxide has a detrimental effect on chlorine, pesticides and organic impurities.

Application features

The difference in concentration and frequency of application depends not only on the varieties of crops, but even on the stage of growth. If the seeds are sprayed with a weak solution, then the adult plant is treated with a more concentrated one.

Benefits for seeds

The planting material (seeds) contains inhibitors - substances that slow down germination. Under natural conditions, inhibitors are neutralized as a result of oxidative processes. In agriculture, the percentage of germination is increased by treating the seeds with a solution of the substance. This is an effective analogue of potassium permanganate.

Peroxide strengthens the immunity of seeds and disinfects

The technology is as follows:

• to disinfect the planting material, it is soaked for a quarter of an hour in a 10% solution, then washed with clean water and dried well;
• to enhance growth, the seeds are soaked for 12 hours in a 0.4% solution, if the planting material is difficult to emerge, soaking is carried out for a day, then washed and dried.

After such treatment, the immunity of seeds and their germination increase, and the resistance of seedlings to diseases increases.

Also, seeds can be sprayed from a spray bottle with a 1% solution. In this case, inhibitors are destroyed, and the container where seeds are germinated and grown undergoes a disinfection process.

Subsequently, the drug is added to water. For this, 3 tablespoons (60 ml) of 3% peroxide are dissolved in 3 liters of water and the seeds and seedlings are watered every five days.

VIDEO: How does hydrogen peroxide benefit seedlings and indoor flowers

Benefits for seedlings

The recipe is universal - suitable for watering all plants, even domestic ones. The recipe is as follows - dissolve 60 ml of 3% hydrogen peroxide in 3 liters of water. The solution can be watered on the ground and sprayed on seedlings once a week.

Seedlings have a similar effect.

The action of such a solution is complex:

• the immunity of the root system is strengthened;
• the roots absorb nutrients better, as a result they grow faster;
• as a result of the oxidative process, the dead roots simply disappear, do not draw out useful substances and are not a source of reproduction of pathogenic microflora.

Due to the poor environmental situation, rainwater contains many impurities harmful to plants, so farmers in Europe use the substance to treat garden and garden plants.

For reference! Hydrogen peroxide is actively used to combat one of the most dangerous diseases of tomatoes - late blight. How to water tomato seedlings with peroxide in this case? Dissolve 40 drops of iodine and a tablespoon of hydrogen peroxide in a bucket of water. The solution can also be sprayed on bushes.

Application to soil for processing

Soil treatment with hydrogen peroxide is carried out by any previously suggested method. But there are additional tricks that are useful for the soil, and therefore for the plant. Sugar and aloe juice act as additional ingredients.

If you take sugar, then it is enough to pour 1 tsp around the plant. before watering. Peroxide is diluted in the standard way: 1 l + 1 tbsp. l.the option is suitable for all plants. But most of all, ficuses and succulents like sugar dressing.

With aloe juice, it's also easy to feed flowers and soil: 1 tbsp each. l. juice and peroxide are stirred in 500 ml of liquid. Let it brew for 1-2 hours and watered. A helpful recipe for flowering and preventing barren flowers.

Florist reviews

Svetlana: “On the recommendation of an experienced florist, I decided to treat the roots of the orchid with a bactericidal composition of peroxide. A week later, the rhizome got stronger, the white moldy bloom disappeared. Previously, using different store dressings, I did not notice such a quick effect. I don’t know how with other plants, but in the case of orchids it works unambiguously. ”

Vladimir: “My wife has spider mites all the time in flowers. What she just didn’t try - the result lasted only for a short time. On the Internet, she read that it is possible to get rid of such pests with a solution of peroxide with iodine. He says that the tick has become smaller. After a week, he will try to process it again until it disappears completely. The product is inexpensive, and the result is visible immediately. "

Irina: “I use a weak solution of peroxide for spraying when the leaves turn yellow. I process it at the very beginning of their yellowing, so that it will surely have an effect. I haven’t tried to water the flowers with the solution yet, but I think that the effect will be no worse than from store-bought fertilizers ”.

5 / 5 ( 2 votes)

How to dilute peroxide for watering seedlings with late blight

Wanting to make the petunia more lush and bloom profusely throughout the season, growers often spray the seedlings with water and peroxide. This widely available and cheap product is bred in the same proportions as for watering strawberries (2 tablespoons per 1 liter of water).

Warning: Do not use peroxide solution to water petunias at the root.

With late blight, which manifests itself in the form of brownish spots on the foliage and dark areas on the fruits, peroxide helps as well as possible. Treatment of the affected bushes is carried out with the following composition:

• water - 2 l;
• 3% H₂O₂ solution - 2 tablespoons.

Recommendations for gardeners

For hydrogen peroxide to be beneficial to plants, the following tips must be considered:

1. The solution is applied to various wounds on the plant.
2. Watering seedlings with the product saturates the soil and root system with oxygen, eliminates bacteria.
3. Soaking the seeds before planting improves their germination.
4. Watering should be done every 4-5 days.
5. After diving, the plants must be sprayed daily.
6. Do not use hydrogen peroxide if there are white spots on the soil.

Due to the oxidizing effect, the water quality is improved. Peroxide has a negative effect on chlorine, pesticides, organic impurities. Regularly watering and spraying with this tool will improve flowering, as well as rid the plant of pests.

Precautions

Hydrogen peroxide is not an overly aggressive chemical. Using a solution, it is difficult to harm plants. Peroxide quickly breaks down into oxygen and water, so overdose is practically impossible.

In order not to harm indoor flowers, you should:

• use a solution of exactly the formulation that suits the type of work being carried out;
• for processing home flowers, use hydrogen peroxide in an accurate dosage;
• use a freshly prepared solution. The process of decomposition into its constituent parts - water and oxygen - passes quickly, and during storage the solution loses its useful qualities;
• if whitish spots resembling mold appear on the surface of the soil, the use of peroxide must be abandoned until the spots disappear completely.

How to prepare the solution?

As a rule, water from the mains is used for irrigation and the only thing that flower growers do with it is to defend at least 6-8 hours before watering. However, some of them still collect rainwater on purpose, as it contains peroxide, which has a beneficial effect on all types of domestic plants.

To prepare a similar composition from ordinary water, you must perform the following steps:

• purchase peroxide;
• Mix 20 ml of the product with 1 liter of water;
• use for watering.

With the resulting solution, treat flowers in various ways no more often than once a week.

Dosage calculation

Depending on the purpose, a different dosage of peroxide is used. If this rule is neglected, you can only harm the plant.

The calculation of the dosage of peroxide is as follows:

• daily watering - Dissolve a few drops of a 3% solution in 1 liter of water;
• preventive actions - the soil is treated with a solution that consists of 1 liter of water and 3 ml of peroxide;
• processing before planting - mix 30 ml of the product in 5 liters of water.

This tool is often used for the prevention and treatment of indoor flower diseases. It helps to strengthen young seedlings and stimulate the growth of mature withering specimens.

Let's repeat the most important information

• The peroxide formula is close to rainwater, so this substance is not harmful, but useful for indoor flowers.
• Regular use of peroxide has a therapeutic effect (combats fungi and harmful insects). In addition, this substance saturates the soil in the pot with oxygen, helps the roots of the plant to absorb useful minerals.
• The easiest way is to water the flowers with water diluted with a few drops of hydrogen peroxide. You can also spray or wipe the leaves with a similar solution.
• To treat flowers, you need a more sophisticated solution of soap shavings, peroxide, water and alcohol.

By the way, our little flowerpots are not alive with peroxide in the cold season (and not only)! There are a number of common cold and available pharmacy products that have proven themselves well both among flower growers and gardeners and gardeners. Here's a quick but very comprehensive overview:

Prevention of pests and diseases

With H2O2, you can prepare a weekly prophylactic spray for balcony and garden flowers and herbs:

• 50 ml 3% hydrogen peroxide
• 2 tablespoons rubbing alcohol
• 3 drops of dishwashing liquid
• 900 ml of water.

The mixture must be prepared just before use. Irrigate the leaves and stems of plants to get rid of aphids, scale insects, mealybugs.

The oxidizing properties of oxygen in peroxide work against blackleg and root rot. Root rot develops in a day if the plant is flooded and the roots are in stagnant water with a low level of dissolved oxygen: water the infected plants abundantly with a solution of phosphorus fertilizer + 3% peroxide (2 tablespoons of H2O2 per liter of fertilizer solution) 2 times a week.

The active release of oxygen displaces anaerobic conditions in the soil; even 2-3 waterings may be enough for healing. Let the water drain well from the pot along with the infection, do not let the pot stand in a pan filled with dead water.

A Canadian hydroponics site talks about hydrogen peroxide as a panacea for root rot. Orchid lovers use peroxide when transplanting, to treat the roots. You can wipe the pots with it before planting.

Gardeners use hydrogen peroxide in greenhouses to prevent mold growth. Cuttings take root faster in H2O2 solution.

Improved growth and protection

There is peroxide in rainwater, this natural phenomenon is called "natural purification". Plants bloom better after rain and grow well. Moreover, they are cured.

This property is inherent in nature. Therefore, there are fields of wild flowers without fertilizers, and they bloom better than those that are fed. For flowers, hydrogen peroxide performs this task perfectly. The tool is similar in composition to the components of rainwater, therefore, after several fertilization procedures, you can notice the transformation of indoor plants.

What colors can you use?

The composition of peroxide resembles rainwater enriched with ozone during a thunderstorm.If you remember how cheerful the plants look in the garden after a summer rain with a thunderstorm, we can assume that such moisture will not harm indoor plants either.

Inexperienced plant breeders are wary of any chemical compounds, so they may have doubts about the harmlessness of hydrogen peroxide and whether it is possible to water indoor flowers with it.

Dispelling doubts will help a single watering with a solution of the least valuable flower. A satisfactory result will remove all questions and concerns.

But not all houseplants benefit from dousing. Do not moisturize plants with velvety (violet), translucent (caladium) or thin (pelargonium) leaves. They do not tolerate high humidity. It is better to water them at the root or apply bottom watering to the pan.

Almost all flowers are useful for feeding with hydrogen peroxide.

Potential harm to a home plant

Peroxide treatment has a beneficial effect on flowers of almost all types and has no contraindications for use. Its chemical composition resembles distilled water. For this reason, indoor flowers take it well.

Florists believe that the use of this tool only has a positive effect on the life of their green pets.

However, it is recommended to adhere to the following rules:

• before use, clean the soil from dried leaves and other debris;
• use only fresh solution;
• strictly observe the recommended dosage;
• do not apply several types of fertilizers at the same time;
• if a white bloom appears on the stems, leaves and roots, you need to stop feeding.

If you follow these guidelines, using peroxide will not harm your plants.

Important! Hydrogen peroxide is a powerful oxidizing agent, so its use is allowed only in a diluted form. If the frequency of watering a houseplant is 3-4 times a week, you cannot apply top dressing every time. For any processing methods, their frequency should not exceed once every 5-7 days.

Banana peel fertilizer

A very popular natural fertilizer for indoor plants and flowers. Banana peels, which are ruthlessly thrown away by us, contain many nutrients such as potassium, phosphorus, magnesium, calcium and nitrogen. Many housewives speak positively about this fertilizer and use it to feed cyclamen, violets, begonias, and other plants.

There are several ways to make banana peel fertilizer.

• Pure banana peel is crushed, placed in half a liter jar and filled with water. Insist for a day, then drain, the volume is brought to 1 liter and indoor plants are watered. The main disadvantage of this method is the unpleasant smell of the infusion.
• Clean banana peels are dried (for example, in the oven or on a battery). Then it is ground in a coffee grinder. The resulting powder is scattered over the top layer of soil in a pot, and then watered with water (about 1 time per month). Another use is to break the dried banana skins into small pieces and place them on the bottom of the pot on top of the drainage during transplanting.
• Finely chop the cleanly washed banana peel and bury it in the ground as deep as possible. The disadvantage of this method is that the peel does not decompose so quickly. In addition, it is difficult to calculate the right amount of peel for a plant.
• Banana sprinkle cocktail. For cooking, you need to mix the dried peel from 4 bananas with 2 tsp. eggshell powder (2-3 pieces) and 20 grams of magnesium sulfate (magnesia). Dilute the resulting solution with 900 ml of water and shake well. The prepared composition must be stored in the refrigerator. It is recommended to spray the plants once a week.

Use in floriculture

Hydrogen peroxide is used for indoor flowers and garden plants. This tool is used in the processing of seedlings:

1. The seeds will germinate better if they are soaked in the solution.As with houseplants, peroxide is great for disinfecting seeds. They will grow faster and bloom well. This requires soaking for 12 hours, and if this applies to plants with a natural difficulty in germination, then it takes 24 hours.
2. Peroxide is suitable for processing seedlings - watering and irrigation.
3. The remedy brings a plant back to life, which, as it seems, can no longer be saved.
4. Peroxide with alcohol helps eliminate insects.
5. The solution will protect against parasites.

Soaking seeds in peroxide

For the preparation of planting material - seeds - peroxide has a double meaning:

1. It acts on inhibitors (many seeds contain such substances in the shells that protect against premature pecking of the nucleus, inhibiting the development of the seed, thereby providing a dormant period). Peroxide-treated seeds germinate more easily and faster.
2. All those who are engaged in the preparation of planting material on their own, for the prevention of diseases, pickle seeds in various compositions (potassium permanganate, stimulants). Peroxide is also suitable for these purposes - saving on the fight against inhibitors, the sprout develops into a strong, sturdy plant.

To saturate the seeds with life-giving oxygen for half a glass of water, a teaspoon of the preparation is required and 3-4 hours of soaking the seeds in this solution.

Other dressings

It turns out that hydrogen peroxide can improve the quality of the soil and increase the ability of plants to absorb nutrients. To do this, it is enough to spill the beds with water with the addition of a substance a couple of days before fertilizing (4-6 tablespoons per bucket of water). So, you can use hydrogen peroxide for cucumbers, tomatoes and many other crops.
Hydrogen peroxide is also useful for old soil. Water it with a product (3-4 tablespoons per 1 liter of water), and gradually the soil will become more fertile due to the enrichment with oxygen.

Houseplants stop blooming and growing over time. But the slowdown in development is not yet terrible, because often the flowers die. A slowdown in growth may indicate the presence of a disease. It is important to check the plant for parasites and diseases, as well as to check the correct watering.

But it also happens that all the rules of care are followed, and the flower still does not grow as it should. In this case, he may have a lack of nutritional components. Then feeding is necessary. Hydrogen peroxide is often used for this. This tool is much more affordable than many others, and it also works no less effectively.

There are many methods for improving plant health. For this, egg water, honey, sugar are used. Can I water flowers with hydrogen peroxide? Such fertilization will be very beneficial. With this tool you get:

1. Eliminate harmful bacteria that interfere with development and flowering.
2. Accelerate flowering.
3. Protect from root rot.

But before using hydrogen peroxide for flowers, it is necessary to eliminate withered and dry leaves, rotten flowers. You will also need to loosen the ground. If the flower is damaged, then the peroxide will work as a disinfectant.

There are other methods for improving the condition of plants:

1. As a top dressing, water (0.5 liters) with sugar (0.5 tsp) is used. Or you can sprinkle a pinch of sugar on the ground before watering. This method works great for all plants.
2. Castor oil is great for those plants that don't bloom. You will need to add 1 tsp. funds for 1 liter of water.
3. Aloe juice, like sugar, is great for all houseplants. Add 1 tsp to water (1.5 liters).
4. Aspirin boosts immunity through spraying. It is enough to dissolve 1 tablet in water (1 liter).
5. Another type of top dressing is banana peel, as it is rich in vitamins and minerals. It is used for transplantation (it should be crushed and laid out on the drainage).
6. Egg water is also used for fertilization. You should not pour out the liquid from boiling eggs, it must be cooled - and you can water the plants.
7. Vitamin B12 is great for feeding violets. One ampoule dissolves in water (1 liter). Watering with a solution is necessary no more than 1 time in 2 weeks.
8. To improve the condition of plants, citrus peels are used. You will need 1-2 pieces, which must be filled with water (1 liter) for a day. Then you can water the flowers with the solution.
9. Wood ash allows you to fill the soil with essential trace elements, as well as protect flowers from diseases. It must be poured with 1 liter of boiling water and left to infuse for 6-7 days. The solution should be watered once every 9 days.
10. It is used for watering mushroom infusion. The fruits are crushed and soaked in water (1 liter). Then the liquid must be drained and the mushrooms must be poured with new water, in a day the solution is ready for watering. It should be used no more than 1 time in 5 days.

Hydrogen peroxide is a cheap and affordable way to improve plant health. You should not buy expensive feeds, many of which have chemical components. Thanks to this substance, it will be possible to keep the plants in perfect order.

Tags: peroxide top dressing Irrigation seedlings tomato seedlings

If your favorite flower stops blooming, freezes in development, or, even worse, starts to hurt, you need to first of all

• check for parasites;
• pay attention to watering.

If everything is in order with this, one thing remains - your ward needs nutrients, and it's time to feed him. Plant nutrition products supply flowers with useful minerals, give energy for growth and flowering.

Using peroxide to prepare seeds for sowing

If you like growing plants from seeds, you can use hydrogen peroxide to prepare them for sowing. In this case, it is necessary to use this pharmaceutical product at the time of soaking. It has a beneficial effect on this process, providing:

• saturation of the seed with oxygen;
• disinfection;
• stimulation of development;
• strengthening of seedlings.

You need to use peroxide to soak seeds according to the instructions:

• Make a mixture of a liter of water and 100 drops of peroxide.
• Wrap the seeds in cheesecloth and immerse in this solution for 30 minutes.
• Transfer the seed to a sieve, rinse it under running water.
• If there is a high risk that the crops will not sprout, then it makes sense to increase the soaking period. For up to a day, you can keep in solution the seeds of exotic plants that you are going to grow at home.

Watering

What is commonly used to water indoor plants? Many people use settled water, which was collected from the tap. But flowers need rainwater. This liquid ensures normal plant growth.

But to achieve this effect, another method will allow. How to water flowers with hydrogen peroxide? You will need 1 liter of water, to which 2 tbsp is added. l. remedy. The composition must be stirred, and you can start feeding the plant.

Watering indoor flowers with hydrogen peroxide should be done once every 5 days. Often this should not be done. The product is suitable for spraying flowers. If you perform the procedures regularly, you will notice an improvement in the condition of the plants.

Fertilizing plants with sleeping coffee

Immediately you need to make a reservation that not all indoor flowers like coffee. Drinking coffee increases the acidity of the soil, and this is not required by all plants. Top dressing from coffee is useful for azaleas, some types of lilies, rhododendrons, conifers and some others.

In addition to acidity, drunk coffee has a good effect on the structure of the soil. It becomes looser and lighter, and, consequently, the oxygen level rises.

Tea brewing can be an analogue of coffee grounds. However, there is also a drawback here. She can attract black flies.

Tips for summer residents

Watering flowers and seedlings with a solution of hydrogen peroxide will strengthen the plants and increase resistance to pests after planting in open ground.But if the last crop suffered from diseases or pests, then the likelihood that harmful microorganisms were preserved in the soil or on garden tools increases.

For preliminary disinfection before planting 6% Hydrogen peroxide is diluted with water 1: 1. With the resulting composition, the tools are washed, the walls, ceiling and windows in greenhouses are abundantly sprayed, the topsoil is treated - when in contact with foulbrood, abundant foam will appear.

After processing, the tools and the greenhouse are washed from the inside with running water, and the soil is spilled abundantly. The next day, the renewed and decontaminated soil is ready for planting seedlings.

Watering plants with hydrogen peroxide avoids the use of household chemicals when growing flowers and crops in the beds. An inexpensive and affordable product is becoming a full-fledged alternative to chemical fertilizing and pest control drugs.

What is peroxide in the garden for?

Hydrogen peroxide is very often used by gardeners to improve the quality of planting material and treatment of plants in the initial stage of development. Most often, peroxide is used for:

• Seed dressing
  Fertilizing plants with hydrogen peroxide
• Germinating seeds
• Seedling processing
• Watering young plants

Hydrogen peroxide solution has similar properties to potassium permanganate solution. Therefore, gardeners often use hydrogen peroxide instead of potassium permanganate.

Treatment of plants with hydrogen peroxide allows them to quickly recover after wilting. Using a peroxide solution with the addition of iodine or alcohol, you can prevent late blight infection and the appearance of pests such as scale insects, aphids and worms.