I want to line the paths between the beds with cardboard, and on top with fresh pine sawdust. Will it harm the plants?

If gardeners leave the paths in the garden open, grass begins to grow in the aisle. They are struggling with her, diligently weeding paths between the beds. Moisture evaporates through uncovered paths. In order not to dry out the soil of the beds and not allow weeds to grow, the paths should not be left open, with bare ground.

For the arrangement of the aisle, construction and improvised materials are used. As a result, the tracks are obtained either solid, for a long time of use, or easily dismantled when sheets of cardboard, roofing material, rough film are simply removed. Different ideas for the design of paths also arise because the pleasure of work and labor productivity depend on how convenient the rows between the beds are.

paths between the beds in the country with their own hands. Photo

An excellent solution for decorating paths between warm beds - covering the space between the beds rubble. Inexpensive material and the absence of difficulties in the implementation of the coating made crushed stone a profitable alternative to concrete, decorative tiles, and bricks. Bulk material paths have become one of the most economical options for paths in the garden and beds.

decorating tracks in the country with your own hands. Photo

To cover the paths between the beds, sheets are used roofing material, flat slate, lattices from racks... Such a covering is easy to fit, it can be removed and re-laid at any time. For mobile tracks, the owners use materials that withstand the load and have a rough surface with an anti-slip effect.

than fill the paths between the gardens. Photo

The design ideas for the paths take into account the heavy load on the surface, if it is foreseen. A wide track made of durable material is planned for carts with water, a trailer for laying the harvested harvest, mobile transport. It doesn't have to be concrete. Pieces of tiles made of natural stone.

than to close the paths between the beds. Photo

It is convenient to cover passages between farming zones plant material... It can be wood chips, sawdust, tops, branches, stems. The soft, all-natural surface is pleasant to walk on. For the winter, walkways can be removed with a rake and sent to the compost heap. Such a path in the garden between the beds makes it easy to change the location of the plots of land for growing plants.

Concrete tracks are not only reliable and practical, but also aesthetic. Pieces of ceramic tiles can be laid out, like a mosaic, interesting patterns, pick up elements that are contrasting in color or similar in tone. The colored material pressed into the cement mortar creates a path of an original look and testifies to the good taste and diligence of the owner of the estate.

paths between the beds in the country with their own hands. Photo

When working with colorful bricks ideas for the design of paths are not limited to its simple installation, because the material can be staggered, fill the gaps with sand or stone chips, and leave gaps for small grass. Compositions of paths and garden fences made with brickwork look beautiful.

You can fight weeds by clearing the aisles of them and trampling the ground. To do this, the grass is dug up or cut with a hoe and removed from the garden. Level the surface with a rake and trample the ground. Weeds will not grow on the trampled land, and the earthen paths between the beds will become an obstacle that protects the crop from moles, mice, which prefer loose soil for movement.

Stationary paths between the beds can be laid out from stones... Before laying stones, soil is selected from the aisle, the surface is leveled, a layer of sand is poured. To prevent grass from breaking through the cracks, you can put plastic wrap or geotextile fabric under the path. The stones are sized and laid out against each other, choosing the flat and most attractive side for the top of the cover.

Gardens with fenced beds look original large stones... They try to select the material of the same size so that it can be laid in horizontal stripes. The masonry is reinforced with concrete.

paths between the beds in the country with their own hands. Photo

Through concrete no weed will break through the paths between the beds, such a reliable coating will serve for many years. The walkways of the tiles laid on the cement mortar are easy to keep clean - the rain washes away the dirt from the paths, if you need to remove the debris, the tiles can be swept up, cleaned with a stream of water. The tile material is frost-resistant, resistant to wear and tear and mechanical stress, not subject to decay.

The path in the garden between the beds in the personal plot can be backfilled colored stone chips... To create such a coating, you need to remove 10-15 cm of the top layer of soil, cover the created recess with non-woven geotextile and fix the edges of the canvas with a curb tape, fill the prepared place with crumbs, pebbles, gravel. Marble chips have a wide range of colors and granules of various sizes. Garden paths and between the beds can be covered with material of the same color or the area can be brightened by combining different shades, saturated with color.

So that the path in the garden between the beds is free of weeds and does not allow the soil to lose moisture, it is used to cover the aisle rubble... The paths between the high fenced beds are leveled, the soil is strengthened with geotextile mesh and covered with construction rubble. A crushed stone coating is not costly, it is beneficial to arrange wide, long paths with an inexpensive building material.

The ideas for the design of paths in the suburban area and on the personal plot are primarily associated with the use of natural materials. Wide track of wood cuts in combination with large stones in natural nature it looks harmonious. To maintain the original design of the path with environmentally friendly materials and prevent stones from creeping, a low multi-level wooden fence was used.

A completely wooden garden path is laid out from the cuts obtained by sawing old uprooted trees. When laying, both wide elements obtained from the trunk are used, and small ones, harvested when sawing thick branches. Treatment with drying oil will help to extend the service life of wooden elements.

paths between the beds in the country with their own hands. Video

From lawn grass

Sow the paths with the Pole grass. This is a low lawn grass that grows rapidly, densely covering the ground.The grass withstands stress well, quickly recovers from damage. You can not cut it for a long time. It prevents weeds from growing. The grass is winter-hardy.

Passages from bent grass should be equipped in mid-September to give it the opportunity to root well. The autumn night coolness will help to form roots and bush.

The future passage between the beds needs to be dug onto a shovel bayonet, fertilized. You can add coarse sand or gravel of the finest fraction to the ground. This will allow the roots to hold better in the ground. It is good to compact the earth. You can walk on them more before sowing. Seeds are sown on trampled soil, and covered with garden soil from above. Sowing should be watered from time to time. Since the bent grows quickly and captures free territories, the remains of slate or roofing material should be dug along the edges of the passage.

If you need to arrange the beds in a different order, it is easy to move such a path to another place by digging it out with sod. It quickly takes root if the landing site is well shed.

Whether in the garden, in the garden - the practicality of garden paths

Paths in the garden are by no means an idea of ​​today, moreover, on a subconscious level, everyone dreams of a solid support under their feet when they have to go out into the garden after a good rain. There is absolutely no pleasure in the fact that the dirt sticks to the floors! But there would be paths ... But if our man thinks that this, God forbid, will have to spend money - well, no, we'd better collect dirt.

But what will be your surprise if you find out that you don't need a dime to build a "sidewalk" between the beds? Imagine, and this option is possible. It is worth thinking about, and you will understand that in addition to a solid foundation under our feet, the paths also perform other functions that can make our life easier. Firstly, when caring for plants, you can go out into the garden almost in your house slippers. Secondly, you will stop carrying dirt into the yard, or even into the house. Thirdly, harvesting will be much easier!

And, fourthly, weed control will remain, if not in the past, then in a very curtailed form - after all, most of the grass grows in the aisles.

The main rule for arranging tracks is that they should be straight.... Since school, we know that the shortest distance between point A and point B is a straight line, and in life this rule is by no means canceled. The winding paths will be appropriate in the garden, where they will fit into the landscape, and for the mood - it is. The vegetable garden requires practicality.

The width of the tracks is another important point. There should be several main paths in the garden that are subject to the greatest load, and additional paths leading to separate beds will already depart from them. For the main ones, it will be enough to take 60 centimeters in breadth, and the auxiliary ones should be exactly such that you can walk without catching the soil and plants - 30 centimeters will be enough.

Knotweed tracks

Highlander pochechuiny (treadmill) is a beautiful grass that densely covers the ground. It grows quickly, does not allow weeds to grow. Resistant to trampling. Winter hardy.

You need to sow seeds in early September. The earth on the aisle should be dug onto a shovel's bayonet, picking out all the roots of the weeds and adding some fine peat with sand. Water the soil, sow the seeds and sprinkle them with the same mixture of peat and sand.

At the edges of the passage, it is imperative to dig in slate or roofing material to prevent the growth of knotweed in the beds.

Such tracks are also easy to transfer to another place if necessary.

Having arranged the correct paths between the beds and trees, you can work on your personal plot comfortably and with pleasure. Illustration for this article is used under a standard license.

Materials for the formation of coverings of paths between the beds

Now you need to consider the materials used for arranging the paths in the row spacing.

Coating substrates

Several different materials can be chosen as a layer that will cover the soil from the sun's rays - these are geotextiles of a certain thickness, black plastic film, roofing felt, as well as sheets of cardboard or even old newspapers laid in several layers.

Geotextile prices

geotextile

Black geotextile was used as an opaque coating

• Geotextile is the best option, since it is designed specifically for laying on the ground under the main top coating and has all the qualities necessary for this function.
• Polyethylene film used more often, as it has a more affordable price. But this material is still characterized by a number of disadvantages. Firstly, the film does not allow water to pass through and this will have to be foreseen when forming the track, making it so that water does not linger on its surface. Secondly, the film is not a "breathable" material, which means that the moisture accumulated under it will not evaporate normally, which can lead to the formation of fungal colonies under it, which can seriously harm the crop.

Roofing material can also be used as a base opaque layer.

• Roofing material can also be used for decking under walkways, but it has the same disadvantages as plastic wrap. But in comparison with it, its durability is higher, it has a greater density and thickness, it can withstand mechanical loads better. True, it is also much more expensive than polyethylene.

If there is a surplus of packaging corrugated board in the house, then you can use it as well.

• Paper or cardboard bedding perfect for all of the above criteria, but, of course, it is short-lived, and it will have to be changed several times per season, especially if the summer turns out to be rainy. By the way, experts do not particularly recommend getting carried away with newspaper layers, since printing ink cannot be called environmentally friendly.

What is geotextile?

Many of the owners of suburban areas, for sure, are not even familiar with this name, not to mention information about the merits of the material itself. A special article of our portal will help fill this gap - it will tell you in detail, what is geotextile and how is it used.

Track coverage

Bulk building materials such as shavings, sand and fine crushed stone can be laid on the substrate as a protective layer. The practice of laying stone or concrete tiles, which, however, is not installed overhaul, that is, the seams are not sealed with concrete, but simply covered with sand. In addition, special plastic and rubber plates, as well as roll coatings made of crumb rubber, are produced for the arrangement of paths. The finished products meet all the requirements for outdoor use.

Simple, but still not the best option, when the paths are simply covered with a layer of sand

• Sand, covered with a substrate, perfectly keeps the path from germination of weeds, does not retain water on the surface and allows the soil to "breathe" freely. The disadvantages of this material are two things. The first is its pronounced flowability, especially in a dry state, therefore it is recommended to lay it in a space fenced off from all sides by walls. And the second is its sticking to shoes and bare feet, which means that the sand will be spread throughout the yard, and will certainly get into the house. Therefore, sand is rarely used as an independent track coating. It is more often used as a leveling and shock-absorbing bedding under the laying of a stone or tile, and it is also used to fill the seams between these products with it. The sand layer under the masonry is usually at least 50 mm.

Paths between the beds, covered with a layer of wood shavings

• Shavings, sawdust or small chips also well suited for backfilling row spacings. They are perfectly permeable to air and water, so the paths are always kept dry and comfortable to walk on. In addition, rotted natural wood over the years of use may well serve as a fertilizer. The disadvantages of such a backfill include the fact that wooden boxes will have to be built for it so that it is in one place and is not particularly carried by the rising wind. The bedding for it is best served by geotextiles, which are also water-permeable and strong enough to, if necessary, roll it up along with the shavings and transfer it to another part of the garden.

Paths covered with stone chips, gravel or fine crushed stone look very neat, and there is practically no dirt on them

• Crushed stone or stone chips can be called the best option from bulk materials, since these materials are durable, allow water and air to pass through, do not stick to shoes and are not carried by the wind around the site. Paths designed in this way look neat and always clean. However, so that the crushed stone does not mix with the soil under it, a reliable base is definitely needed, as it is recommended to use geotextiles with a thickness of at least 2.5 ÷ 3 mm with a high density, otherwise the sharp edges of the stone can damage the litter. You can also lay thick cardboard under the crumb, but there is no guarantee that the paper will not sour from rainwater and the stone will not fall into the ground.

When making a cover from plastic bottle caps, some owners turn on their imagination to the fullest ...

• Covering from plastic bottle caps is another option for arranging row spacing. Such a "carpet" can be removable, that is, portable, or permanently installed. In the latter case, the covers are installed in a layer of uncured concrete mortar, poured onto the path, However, this area of ​​the garden can no longer be used as a garden bed. The "mobile" version of the cover made of covers, one might say, will cost practically nothing, but it will take a lot of time to make it, since all prepared elements must be fastened together with a thick fishing line or a strong thread that is resistant to moisture, ultraviolet light and temperature extremes. Moreover, for connection in each of the covers, it is necessary to make four holes - they are usually melted with a heated awl.

This is how plastic bottle caps are usually connected together.
The covers can be combined with the drawing up of a certain pattern or pattern - for this, details of the required color are specially selected and an ornament is made from them according to the sketch. If there is no artistic streak, then nothing prevents them from being held together chaotically - you will also get a very entertaining picture. You should not tighten the covers tightly together, but they should not dangle freely either. If they are held together relatively loosely, then the resulting "carpet" can be easily rolled up and moved to another place.

Such a coating is laid on a geotextile substrate, which will prevent the germination of weeds, and the covers will create an outwardly interesting and comfortable path. It should be noted that it is pleasant to walk barefoot on such a surface, so some craftsmen make massage rugs for the feet from the covers. If you liked this idea of ​​arranging the paths, then you need to start collecting the covers without delay, since a very large number of them will be required.

The paths lined with paving slabs are reliable, but a little, nevertheless, "heavy"

• Stone or concrete paving slabs will make the paths strong and rigid, and it will be comfortable to walk on such a surface.But if cement is used for laying them, then this area cannot be used in the future for planting plants. Therefore, if there is a desire to lay out the tracks with any kind of such a tile, then under them on the substrate you should make a bed of sand, and fill the seams with it. In this case, water from the surface will easily go into the ground, and if necessary, move the track to another place, it is easy to dismantle the tiles from such a base.

Paving slab prices

paving slabs

A very good solution for any garden or vegetable garden - rubber tile "RESIPLIT-20"

• Rubber tile also often used to cover paths between beds. It can be laid on well-compacted and leveled ground, even without a backing. The tile is easy to assemble and dismantle, it is durable and will serve as a track for more than one year. So, manufacturers give it a guarantee for operation, subject to the recommendations, for 10 ÷ 20 years. The range of permissible temperatures is very wide - it varies from -40 to +90 degrees, so the material can not even be dismantled for the winter period.

Rubber tile coating is used not only for garden paths - it is intended for arranging car sites, floors in a garage and industrial workshops, and from these factors it can be concluded how durable and reliable the material is. The tile does not slip, as there is a relief pattern on its surface. It is made from environmentally friendly ingredients, so it does not emit harmful substances and will not negatively affect the quality of vegetables. In addition, the rubber does not transmit light to the ground, so weeds will not break through on the path. However, the rubber tile does not allow moisture to pass through, so it must be installed in such a way that water can drain from the floor to the sides. The standard dimensions of the tiles shown for the example in the illustration above are 550 × 550 mm, while the thickness may vary, but it is best to choose options at least 20 mm thick. Rubber tiles are usually equipped with locking joints, which is very convenient - after laying, even under load, the coating will not creep.

Roll cover made of crumb rubber

• Roll, modular flooring, as well as crumb rubber tiles - all these products have approximately similar characteristics and are intended specifically for the design of garden and vegetable paths, as well as various sites, including automobile ones. This material is made from rubber that has been crushed and pressed into various shapes. Thanks to this manufacturing technology, the rubber coating becomes water and air permeable, therefore it does not create a "greenhouse effect" for the soil. The material does not allow sunlight to pass through, so weeds will not germinate on the path. Such tiles do not slip, as they have a pronounced rough surface, and this makes the paved paths completely safe for use in any weather. It is easy to care for the crumb rubber coating, as it can be easily washed with water from a hose, and this process can be done immediately while watering the beds.

The material is resistant to wear and temperature extremes, so it does not need to be removed from the garden for the winter. The coating is not subject to mechanical damage and decay. In a word - sheer dignity!

Garden path tiled with crumb rubber

Installation of roll and tile cover is very simple - it is laid on a well-leveled, weed-free and compacted soil surface, without the use of a substrate. Under the influence of temperature changes, from negative to extremely high, which may be on the soil surface, the coating does not soften or dry out.

Roll coverings are produced in widths of 500 and 3500 mm. Its thickness may vary, but 10 mm is enough for arranging the tracks.

Rubber tiles can have different configurations, but they always fit together perfectly, creating a durable coating due to the locking joints.

Any coating made using this technology is not only practical, but also very aesthetically pleasing. The paths with this material are neat and pleasant to walk on.

The only drawback of any crumb rubber coating is its rather high price.

Paths lined with modular PVC plates "PlastDor-1"

• Plastic perforated tiles for garden paths are another very good option for decorating row spacings. The cover of these modules is easy to assemble and disassemble, and it can be laid on weed-free and compacted soil or on a permeable substrate. Plastic boards can be used several times, and not only for covering paths, but also for arranging playgrounds or picnic areas.

The wear resistance of this coating is provided by primary polypropylene, which is used for its manufacture. It is odorless and does not emit harmful substances into the environment, so the material can be safely called environmentally friendly. Another production option is also made of completely safe polyvinyl chloride (PVC).

Prices for molds for making tiles

mold for making tiles

Laying or dismantling such neat paths takes just a few minutes.

Plates have increased impact resistance and can be operated in the temperature range from -30 to +50 degrees.

Docking of modules with each other is carried out using special clamps that come with them in the kit.

The advantage of all ready-made coatings, both rolled and modular, is their simple and quick installation and dismantling, which is especially important if it is necessary to equip paths in the country, which is used only in the summer. In the absence of owners, ill-wishers may visit the site, who are able, so to speak, to borrow coverage for their own needs. Therefore, for the winter period, modules or rugs from the paths are best assembled, washed, dried and removed to the premises of outbuildings.

At the same time, in areas with permanent residence, the aisles are left covered year-round, since the material is designed for operation at both low and high temperatures.

Compost paths

It is impossible not to mention the compost paths in the aisles, which are equipped by experienced gardeners. There is even a triple benefit here:

• The production of natural fertilizer for the beds is in progress;
• The arrangement of the tracks with a coating is provided, on which it is quite possible to walk without getting your shoes dirty.
• The problem of utilization of plant waste is being solved, which can be placed in compost in any quantity.

A very good solution would be to use more compost composts between the beds - both neatness and simultaneous replenishment of the soil
The work on arranging such paths is quite laborious, as it requires the application of physical effort. However, gardeners are no stranger to digging up beds. So, the measures for creating compost aisles are carried out in the following order:

• The first step is to mark the territory - in this case, the location of the beds themselves and the paths between them is determined. Marking is carried out using wooden pegs or ordinary branches that can be stuck into the ground. This process will help keep the beds and paths neat and tidy.
• The next stage is to dig up the soil - first in the garden, then on the path. Moreover, the path is not just dug, but deepens by 300 ÷ 400 mm, and the fertile soil, selected from the resulting ditch, is pounced on the garden bed.
• Further, the raw materials for the future compost are placed in the aisles.First, if there is, manure or chicken droppings are thrown onto the ground - it will certainly attract earthworms, which will speed up the processing of plant waste. Not too thick branches or corn stalks are laid on top of the manure - this layer will create air pockets that are necessary for the normal functioning of working bacteria. The next layer is grass, cabbage leaves and fallen leaves from trees, as well as waste after cleaning vegetables, which can be periodically added to compost ditches. They should be filled almost to the top.

Special bacterial preparations, which are sold in specialized stores, will help speed up the process of biological processing of plant waste.

• After that, it is recommended to water the entire contents of the compost trenches with water, and then - with a special preparation containing live, but temporarily "dormant" bacteria. This product is diluted in a bucket of warm water, a little sugar is added to activate the bacteria, then the solution is left to stand in the sun for 30 ÷ 40 minutes. Next, the solution is poured into a watering can, and compost ditches are watered from it. Some preparations can be prepared differently - instructions on this subject must be attached to the package.
• The filled trenches treated with bioactive substances are covered with geotextiles. If the compost aisles are arranged in the spring, then a roll or modular covering is laid on top of the geotextile, on which it will be possible to walk. If this process is carried out in the fall, then stones are simply laid on top of the covering material, which will press the canvas and prevent the wind from moving it to the side.

It is best to arrange compost row spacings in autumn, when there is a lot of plant materials. In winter, the snow will cover the geotextile, and inside the ditch it will be warm and humid, which is very important for the quality functioning of the created bio-environment, which will do most of its "work" during the autumn-winter period.

Next fall, when the compost is ready, the beds and aisles can be swapped and compost paths created in place of the former beds. Thus, the whole vegetable garden is gradually fertilized.

Prices for plastic tiles for garden paths

plastic tile for garden paths

Compost is perhaps the best fertilizer for the garden!

And most importantly, it can be obtained in the required quantity practically free of charge, only by making certain efforts and creating the necessary conditions for this. And one of the conditions is a well-equipped compost pit, the variety of designs of which and the methods of their installation are described in detail in a special article of our portal.

* * * * * * *

Let's summarize. Obviously, if desired, and the presence of time, the path between the beds can be done independently, without resorting to outside help. Moreover, as a last resort, for this purpose, you can use the materials at hand that will always be found on the site. In addition to the usual paths, it will be most practical to make compost paths - this way you can significantly save on fertilizers and get high-quality environmentally friendly compost without chemical additives. In this case, the paths will not only create comfort when working in the garden, but will also help to get a rich harvest.

Wood shavings and chips paths

It is an organic material that will prevent weeds from growing and will reliably cover the ground from drying out.

To arrange paths from chips, you need to remove a layer of earth by 5-6 cm. Pour sawdust on the prepared surface, moisten them and tamp them. Pour shavings mixed with wood chips on top. If possible, add decorative colored chips, then the garden area will acquire a beautiful well-groomed appearance.

Over time, such a path will settle, and it will need to be filled up with fresh material once every 3-5 years.

Basic rules for the construction of beds

The beds should be located from north to south.It is better to build them elevated above ground level. This allows the soil to warm up better, facilitates processing. To do this, boards of the desired shape are hammered from boards or other material. Having deepened the level of the ground by half a bayonet, they fall asleep in the resulting base with earth, humus and other components, depending on the type of plant. The frame is made not only of boards. Bricks, stones, plastic molds will go. The frame height is about half a meter. The bottom is covered with foil and metal mesh. It will keep the crop from mice.

If the beds are raised above the ground and decorated with bumpers, then the path in the garden between the beds can be of any material. You can even sow lawn grass on it. This will not affect the cultivation of crops in any way, because they will be at a height, which means that grass seeds will not fall into the ground and will not clog the plantings. The photo shows various ideas for decorating paths between such beds.

Material selection

Whatever material the gardener chooses, the paths between the beds should be comfortable, practical, durable and safe. Cost also plays an important role. What properties should the material for summer cottages have? Factors for choosing paths between beds:

• resistance to damage and temporary changes;
• tolerance of low temperatures and seasonal weather fluctuations;
• ease of care;
• durability;
• the ability to repair if necessary;
• load on the track;
• general design and relief of the site.

When choosing paths, you should not plan them near trees and bushes. The roots of these plantings can destroy any cover. Also, paths in places where a lot of water flows down are undesirable.

How to cover the paths between the beds? All country paths are divided into hard and soft. The hard ones include wood, concrete, brick, stone, as well as a variety of tiled ones. Soft are bulk made of sand and other materials.

Flat slate

Making flat slate walkways is the least problematic option I've listed above. However, this technology has several significant disadvantages. Therefore, I would think several times before lining the furrows with this material.

Here are the main weaknesses of flat slate tracks:

• Slate is one of the most expensive materials for creating paths. The cost of one sheet can be up to 1200 rubles. In the volume of the entire vegetable garden, even by the most conservative estimates, a very impressive amount comes out;
• Over time, chips appear on the slate, and the material itself begins to gradually crumble;
• The slate is easily damaged by heavy garden tools. An accidentally dropped shovel can damage or even split the leaf;
• According to numerous claims, slate is harmful to human health. Whether this is really so, I do not know. However, I prefer to play it safe once again.

Of course, in addition to the disadvantages described above, flat slate has a number of advantages. However, I nevertheless decided to include it in the list of “problem materials”.

Disadvantages of conventional dirt paths

To make the garden aesthetically pleasing, it is necessary to arrange the gaps between the ridges. Unequipped soil paths running among the planting areas cause a lot of inconvenience:

• overgrowth with weeds;
• accumulation of rainwater;
• traumatic movement;
• dirt adhering to shoes.

The landscaped garden paths are part of the landscape of the site. Apply different techniques and materials to harmonize with the overall design. For effective weed control, fence and raise the beds to obstruct the growth of plants from the furrows into the planting area.

It will be useful for you:

7 Useful Ways To Use Newspapers For The Garden Often, after buying, large and small, household appliances, packing cardboard boxes are thrown into the trash, so ...

Pouring with concrete

Before pouring the formwork, it is worth making sure that the separating elements are installed in it. They should be placed every 1-1.5 meters. Plates made of metal or plastic will do. After drying, they are removed.

For pouring, you can buy movable concrete. Alternatively, you can make a concrete mix with your own hands. Recipes are different:

• cement and sand in a ratio of 1: 3, plus water;
• for one part of cement, two parts of sand and crushed stone, water;
• for one part of cement, three parts of sand and crushed stone, water.

Clay is added for elasticity.

Water is added in such a volume that the finished solution can drain slowly. The finished mixture is filled to the brim with the entire formwork. For uniformity, they are pierced with a shovel or reinforcement.

The top is aligned with a rule or board. Cover with a film, which is removed after 5 days. The formwork is also removed.

DIY concrete tiles

To get a beautiful concrete path, you can use ready-made pouring forms.

For this, a base is prepared - in the same way as for a regular strip of concrete. Then they start creating the track:

1. The base is spilled with water.
2. The molds are coated with grease from the inside.
3. They put the forms on the sand, pressing a little.
4. Sprinkle with water.
5. Pour the prepared solution into the mold. If necessary, a pigment is added to the solution in advance, as well as a plasticizer.
6. Consolidate and level.
7. After 30 minutes, the mold is removed and transferred to the next section.
8. Cover with a film that can be removed after 5 days.

How to install rubber tiles yourself?

Installation of crumb rubber tiles is easy and accessible to every gardener. For a summer residence, a tile with parameters 500 x 500 mm, 30-40 mm thick is suitable.

1. Installation begins with the preparation of the markings for the track.
2. Next, the sod layer is removed and all weeds are removed. The soil is removed to a depth of 140-200 mm, the trench is tamped.
3. Then fine crushed stone is laid by 70-100 mm. A layer of cement and sand (70 mm) is poured on top. You can do with just sand. However, cement will add strength.
4. Install rubber curbs.
5. Special sleeves are placed in each tile. Prepared modules are laid, docking them together. There is no need to make a slope to drain the water, since water will easily seep through tiles and into gaps.

The lesser thickness of the rubber modules is not suitable for the manufacture of tracks. They are used to renovate old coatings such as concrete.

Rubber modules

A new and convenient material for paths between beds is rubber crumb modules. This material is made from used tires, which are crushed. The material has excellent characteristics:

• a path made of such material is beautiful;
• the track is completely safe - it does not slip in wet weather;
• easily assembled without the involvement of specialists;
• has a long service life - at least 10 years;
• firmly withstands temperature fluctuations - extreme heat and severe frosts;
• resistant to harmful influences, not susceptible to fungus and mold;
• permeable - rainwater is quickly absorbed;
• environmentally friendly - there is no release of substances hazardous to health;
• maintainable - if necessary, the desired area is changed.

Unfortunately, the material is not without its drawbacks:

1. High cost - at least 1,500 rubles. per sq. meter.
2. The flammability of rubber, which makes it impossible to use it in the area of ​​contact with an open fire, for example, near a barbecue.

In addition, the ease of assembling the material may turn out to be a disadvantage for the owner, since the tiles can be quickly and easily stolen by intruders.

From brick fight

If you want to lay out your path with old bricks, you will have to work hard and select well-preserved copies. Only clean bricks without adhered cement and severe damage are suitable for laying.

If you lay a path from just about anything, then soon some of the bricks will go into the ground, turn over and begin to crumble.The furrow between the beds will turn into an obstacle course where you can easily twist your leg.

If you wish, you can make a good path from a brick battle, but it will take a lot of time and effort. But, even so, walking on such a surface will be rather uncomfortable. Therefore, I consider it fair to call this option one of the most problematic.